Organized Fiber Routing Inside a Tight Mechanical Envelope
A custom optical flex circuit arranges multiple optical fibers on a flexible substrate according to an approved routing map. Instead of treating every fiber as a loose lead, the path geometry, exit position, lead length and channel identity are planned as one documented assembly.
This format is intended for fixed internal equipment routing where a conventional fiber harness takes up too much space or creates unnecessary loose-fiber management. It can support point-to-point, fan-out or another project-defined topology, subject to engineering review.
Core Design Benefits
- Predefined optical paths: document every input-to-output relationship before design release.
- Low-profile construction: organize multiple fiber paths as one flexible assembly.
- Controlled fiber exits: define exit side, position, pitch, lead length and tolerance.
- Drawing-controlled build: align prototype inspection and production with one approved revision.
Custom Optical Flex Circuit Design Inputs
| Design field | Define the requirement | Send with the RFQ |
|---|---|---|
| Routing topology | Point-to-point, fan-out or project-defined map | Port-to-port mapping table |
| Fiber requirement | Singlemode, multimode or specialty fiber | Fiber specification and wavelength |
| Mechanical envelope | Outline, keep-out areas and mounting constraints | 2D or 3D equipment drawing |
| Fiber exits | Side, position, pitch, lead length and tolerance | Every exit marked in the drawing |
| Termination | Ferrule, connector, bare fiber or splice-ready lead | Interface list and orientation |
| Optical criteria | IL, RL, continuity, length match or skew | Limits, wavelength and test method |
Engineering note: Final fiber count, materials, dimensions, optical performance and terminations are confirmed in the approved project drawing and specification.
Intended Applications
- Card-to-card and board-level optical interconnects
- Internal routing between optical engines and front-panel interfaces
- Optical backplanes and compact switching equipment
- AI and HPC equipment with controlled internal fiber paths
- Designs requiring fixed exit geometry and documented channel identification
From Fiber Map to Production Release
- Submit the application package: route map, equipment envelope, fiber, interfaces and quantity.
- Engineering feasibility review: evaluate routing, exits, bend constraints and missing inputs.
- Drawing confirmation: approve port IDs, dimensions, tolerances and inspection criteria.
- Prototype and qualification: build and inspect the approved sample configuration.
- Production release: manufacture only to the controlled drawing and quality plan.
Inspection and Acceptance
- Visual workmanship and substrate condition
- Dimensions against the approved drawing
- Fiber continuity, channel mapping and polarity
- Insertion loss and return loss when specified
- Connector end-face inspection when applicable
- Labels, packaging and traceability checks
Related Optical Connectivity
Frequently Asked Questions
How is an optical flex circuit different from a fiber harness?
A harness manages separate cables or bundled leads. An optical flex circuit arranges multiple fiber paths on a flexible substrate according to an approved layout and routing map.
Can the assembly use point-to-point or fan-out routing?
Yes. The topology is defined by the port map, geometry, exits, bend constraints and termination design.
Which fiber types and connectors are available?
Submit the required fiber and interfaces as design inputs. Exact material and termination availability is confirmed during project engineering review.
What happens if the equipment envelope changes?
Changes to the outline, exits, available space, fiber or termination may affect feasibility and require a new review before production.
What should I send for a quotation?
Send the port map, mechanical drawing, fiber and interface requirements, lead lengths, optical limits, quantity and target schedule.
Request an Engineering Review
Share the routing diagram, interface list and available equipment space. BWNFiber will identify missing inputs and review project feasibility.
