C1.5
MPO-8 to 2x MPO-4 OM5 Conversion Cable
The BWNFiber MPO-8 to 2x MPO-4 OM5 Conversion Cable remaps one 8-fiber MPO-8 PC female port onto two MPO-4 PC female ports on a lime-green OM5 jacket. It keeps all eight fibers in service when an 8-fiber OM5 channel must feed two 4-fiber MPO interfaces, instead of stranding half the pairs. Polarity is factory-built as Type A, B or C from your wiring drawing, and every assembly is optically inspected before shipment.

Product Overview
This 8-fiber OM5 conversion cable takes one MPO-8 PC female connector to two MPO-4 PC female connectors on a lime-green jacket. It remaps a single 8-fiber MPO port onto two 4-fiber MPO ports inside the same connector family, so an 8-fiber OM5 plant can serve equipment that breaks the channel into two independent 4-fiber links — with no LC legs and no stranded fibers.
OM5 is wideband multimode fiber (50/125 µm, TIA-492-AAAE). It is specified for SWDM-class optics, but jacket color alone does not make a link SWDM: confirm the transceiver datasheet before choosing OM5 over OM4. Overall length is 1–50 m in catalog steps, or a custom length on the drawing.
This page covers only the OM5, PC-polish, 8→2×4 SKU. The OM3, OM4 and OS2 versions — and a mixed-polish OM4 APC-to-PC version — are separate products in the MPO Conversion Cable series.
Key Features
- One MPO-8 PC female to 2 × MPO-4 PC female — an MPO-to-MPO remap, no LC legs
- 8 live fibers on OM5 50/125 µm wideband multimode, lime green jacket
- PC polish and female (unpinned) gender on all three ends
- Factory-set polarity: Type A, B or C built from the wiring drawing, not field-switchable
- Overall length 1–50 m in catalog steps; custom lengths quoted on the drawing
- Jacket options LSZH, OFNP or OFNR to match pathway requirements
- Factory-terminated MPO ends on every leg, optically inspected before shipment
Technical Specifications
| Item | Specification |
|---|---|
| Product Family | MPO Conversion Cable (MPO-to-MPO remap) |
| Conversion Map | MPO-8 → 2 × MPO-4 |
| Active Fibers | 8 |
| Fiber Type | OM5 wideband multimode, 50/125 µm (TIA-492-AAAE) |
| Connector A | MPO-8, PC polish, female (unpinned) |
| Connector B | 2 × MPO-4, PC polish, female (unpinned) |
| Polarity | Type A / Type B / Type C, factory-set per conversion wiring drawing |
| Jacket Color | Lime green |
| Jacket Rating | LSZH / OFNP / OFNR |
| Overall Length | 1–50 m standard steps; custom on request |
| Standards | TIA/EIA-568.3-D, EIA/TIA-604-5 (FOCIS 5), IEC 61754-7, IEC 61753-1, TIA-492-AAAE, GR-1435-CORE, RoHS |
| Insertion / Return Loss | Final IL/RL limits follow the BWNFiber test specification for the selected loss grade; test method reference IEC 61300-3-4 |
Selection Guidance
- Choose OM5 only when the link plan specifies wideband multimode optics. For standard 850 nm plants, the OM4 PC version covers the same 8→2×4 map at lower fiber cost.
- All three ends here are PC polish. For singlemode plants use the OS2 APC version; for OM3 plants use the OM3 PC version.
- Female ends mate with the pinned (male) MPO ports on transceivers, trunks and cassettes. Male ends are available on request where the port drawing requires pins.
- Polarity is not field-switchable. Send the conversion wiring drawing with the inquiry and select Type A, B or C at order stage.
- Overall length is measured from the single MPO-8 end to the farthest MPO-4 leg end.
- Choosing between a conversion cable and a cassette module? Read the MPO conversion cable vs module comparison before fixing the BOM.
Applications
- Base-8 OM5 plants that split one 8-fiber MPO port into two 4-fiber MPO interfaces
- Keeping all eight fibers in service when 8-fiber channels feed 4-fiber equipment ports — no stranded pairs
- Wideband multimode links where the transceiver datasheet specifies OM5 (SWDM-class optics, after optics confirmation)
- High-density data-center rows standardized on OM5 cabling for later wideband upgrades
Not this product: OM3/OM4 plants (use the OM3 or OM4 versions of the same map), singlemode plants (use the OS2 version), or MPO-to-LC fanouts (see the MPO Breakout & Harness Cable series).
Order Guide
This SKU is not polarity-switchable in the field. Choose polarity from the conversion wiring drawing, then overall length and jacket material. Overall length is measured from the single MPO-8 end to the farthest MPO-4 leg end.
| Polarity | Jacket Ratings | Standard Lengths |
|---|---|---|
| Type A | LSZH / OFNP / OFNR | 1 m (3 ft), 1.5 m (5 ft), 2 m (7 ft), 3 m (10 ft), 5 m (16 ft), 7 m (23 ft), 10 m (33 ft), 15 m (49 ft), 20 m (66 ft), 25 m (82 ft), 30 m (98 ft), 40 m (131 ft), 50 m (164 ft) |
| Type B | LSZH / OFNP / OFNR | Same 13 steps as Type A |
| Type C | LSZH / OFNP / OFNR | Same 13 steps as Type A |
Custom lengths between or beyond these steps, and pulling eyes, are quoted on the drawing.
Order code pattern: BWN-CV-M8PC-2M4PC-OM5-LM-{POL}-{JKT}-{LEN} — POL = A/B/C, JKT = LSZH/OFNP/OFNR, LEN = overall length in meters.
Example: BWN-CV-M8PC-2M4PC-OM5-LM-A-LSZH-10M = Type A polarity, LSZH jacket, 10 m.
Why Source from BWNFiber
- MPO-to-MPO conversion is a drawing-driven product: each assembly is built from the confirmed fiber map, polarity type and length schedule — not from a generic harness pattern.
- Factory-terminated MPO ends on every leg, optically inspected before shipment.
- Catalog lengths from 1 m to 50 m plus project lengths, in LSZH, OFNP or OFNR jackets.
- OEM print, fiber-map records and IL/RL test reports available for project handover.
- One drawing set covers the whole series: OM3, OM4, OM5 and OS2, plus 12-interface, 16-fiber and 24-fiber maps, so mixed plants source from a single supplier.
Frequently Asked Questions
1. Does a lime-green jacket mean this cable is SWDM-ready?
No. Lime green identifies OM5 fiber. SWDM operation depends on the transceivers, not the jacket color. Confirm the optics before ordering OM5 for a wideband link.
2. What is the OM4 equivalent of this cable?
The OM4 PC version is the MPO-8 to 2x MPO-4 OM4 Conversion Cable. A mixed-polish OM4 APC-to-PC version exists for plants that specify it on the BOM.
3. Is there an LC breakout version?
This page is an MPO-to-MPO conversion cable. For one MPO broken out to LC legs, see the MPO Breakout & Harness Cable series.
4. Why are all three ends female?
Transceiver ports and most trunk and cassette ports are pinned (male), so the mating cable ends are unpinned (female). Male ends can be built on request when the port drawing requires pins.
5. How do I choose between Type A, B and C polarity?
Polarity defines how the eight fiber positions map onto the two MPO-4 ends. It is set at the factory from your wiring drawing and cannot be changed in the field — send the drawing with the inquiry and we will confirm the type on the build sheet.
6. What lengths are available?
Catalog steps from 1 m to 50 m (1, 1.5, 2, 3, 5, 7, 10, 15, 20, 25, 30, 40, 50 m), with custom lengths quoted on the drawing.
7. Can I order this map in OS2 or OM3?
Yes. The OS2 APC version and the OM3 PC version use the same 8→2×4 map.
Related Products
Explore additional fiber optic products related to this item and suitable for similar network deployment needs.