C2.1
MPO-12 to 2x MPO-4 OM4 Conversion Cable, 8 Fibers
An MPO-to-MPO conversion cable that lands one 8-fiber MPO-12/APC female port on two MPO-4/PC female ports — eight live OM4 fibers, four center positions dark.

Product Overview
This conversion cable runs from one MPO-12/APC female connector to two MPO-4/PC female connectors on a violet OM4 jacket. The 12-position ferrule carries eight live fibers; the four center positions stay dark. It splits four duplex channels into two groups of two, so an OM4 plant that presents an MPO-12 interface can feed two 4-fiber MPO-4 ports without leaving dark fibers in the link path.
Also searched as an MPO shuffle cable or conversion harness, this is an MPO-to-MPO assembly that only changes the fiber map — it never lands on LC. It is not an MPO-to-LC breakout, and not a 12-fiber link. The polish pair is mixed by design: APC on the MPO-12 end, PC on both MPO-4 legs, so verify both mating ports on the channel drawing before ordering. Polarity is factory-wired as Type A, B or C per the conversion drawing and cannot be changed in the field. Overall length runs 1–50 m across 13 stock steps, with custom lengths and pulling eyes quoted on the drawing.
Key Features
- MPO-12/APC female to 2 × MPO-4/PC female — MPO-to-MPO conversion, no LC
- 8 live fibers in a 12-position ferrule; the 4 center positions stay dark
- OM4 50/125 μm multimode, violet jacket
- Mixed polish pair APC → PC — verify both end faces on the channel drawing
- Female (unpinned) on all three ends; pinned builds on request
- Factory-set Type A / B / C polarity per the conversion wiring drawing
- Overall lengths 1–50 m in 13 stock steps; custom lengths and pulling eyes on the drawing
- Serialized IL/RL and fiber-map records available with the shipment
Technical Specifications
| Item | Specification |
|---|---|
| Connector system | Generic MPO |
| Interface | MPO-12 to 2 × MPO-4 |
| Conversion map | 12 → 2×4 — four duplex channels split into two groups of two |
| Active fibers | 8 (four center positions of the 12-position ferrule stay dark) |
| Fiber type | OM4 multimode, 50/125 μm |
| Jacket color | Violet |
| Polish pair | APC on MPO-12 / PC on MPO-4 (mixed by design) |
| Gender | Female (F) on all ends; male (pinned) on request |
| Cable form | 3.0 mm round legs from a short conversion body, typical |
| Jacket rating | LSZH / OFNP / OFNR |
| Polarity | Type A / Type B / Type C, fixed at manufacture per drawing |
| Insertion loss, multimode low loss | ≤0.35 dB, typical ≤0.20 dB |
| Insertion loss, multimode standard | ≤0.60 dB, typical ≤0.35 dB |
| Return loss, multimode | ≥20 dB |
| Operating wavelength | 850 / 1300 nm (OM4 windows) |
| Operating temperature | −20 °C to +70 °C |
| Storage temperature | −40 °C to +85 °C |
| Standard length set | 1 / 1.5 / 2 / 3 / 5 / 7 / 10 / 15 / 20 / 25 / 30 / 40 / 50 m |
| Standards | TIA/EIA-568.3-D, EIA/TIA 604-5, IEC 61754-7, IEC 61753-1, GR-1435-CORE, RoHS |
Notice: Figures are typical and for reference only, not a guarantee. Final IL / RL limits follow the BWNFiber test specification for the selected loss grade. Test method reference: IEC 61300-3-4.
Selection Guidance
- 8 live fibers, not 12. The MPO-12 ferrule lights eight fibers into the two MPO-4 legs; the four center positions stay dark. If the link needs 12 live fibers, this is not the right assembly.
- Mixed polish pair. APC on the MPO-12 end, PC on the two MPO-4 legs. Confirm which port each end mates with, and never mate APC to PC on the same connection.
- Polarity is fixed at manufacture. Type A / B / C on a conversion cable follows the conversion wiring drawing — it is not the same map as Type A / B / C on a same-interface patch cord. Re-verify the full channel (trunks, cassettes, panels) with the MPO polarity channel design workflow before confirming the method.
- Female (unpinned) on all three ends is the catalog default, because the assembly plugs into pinned modules or pinned adapters. If the mating side is unpinned, request a pinned (male) build at inquiry. Do not mate two pinned ends.
- Length is measured from the single MPO-12 end to the farthest MPO-4 leg.
- Need the same 8-fiber job on an MPO-8 ferrule instead? The MPO-8 to 2x MPO-4 builds sit in the same MPO conversion cable series — match the ferrule to the hardware you plug into.
- For MPO-to-LC fan-out, use the MPO breakout & harness family. This page stays MPO-to-MPO. Weighing a routed conversion cable against an enclosed module? See the conversion cable vs module comparison.
Applications
Use this 12→2×4 OM4 conversion cable when a link starts on 12-position MPO hardware but only eight OM4 fibers are live, and the far end must land on two 4-fiber MPO ports.
Typical uses:
- Splitting one 8-fiber MPO-12 port (four duplex channels) into two 4-fiber MPO-4 links (two duplex channels each)
- Adapting Base-12 panels, cassettes and trunks to MPO-4 interfaces without paying for dark fibers in the link path
- Reusing installed OM4 MPO-12 plant when new equipment presents MPO-4 ports
- High-density data-center rows where one 12-position port feeds two lower-count MPO connections
Do not use this page for:
- Links that need 12 live fibers end to end
- MPO-to-LC duplex fan-out (that is the breakout/harness family)
- 400G/800G SR8-class conversion — that map belongs to the MPO-16 to 2x MPO-8 build in the same series
Order Guide
This SKU is not polarity-switchable in the field. Choose polarity (Type A, B or C) from the conversion wiring drawing, then jacket material and overall length. Overall length is measured from the single-count MPO end to the farthest multi-leg MPO end.
| Product description | Polarity | Lengths (m) | Jacket material |
|---|---|---|---|
| MPO-12/APC (F) to 2 x MPO-4 PC (F) Conversion Cable, 8 Fibers, OM4 Multimode Violet | Type A | 1 / 1.5 / 2 / 3 / 5 / 7 / 10 / 15 / 20 / 25 / 30 / 40 / 50 | LSZH / OFNP / OFNR |
| MPO-12/APC (F) to 2 x MPO-4 PC (F) Conversion Cable, 8 Fibers, OM4 Multimode Violet | Type B | 1 / 1.5 / 2 / 3 / 5 / 7 / 10 / 15 / 20 / 25 / 30 / 40 / 50 | LSZH / OFNP / OFNR |
| MPO-12/APC (F) to 2 x MPO-4 PC (F) Conversion Cable, 8 Fibers, OM4 Multimode Violet | Type C | 1 / 1.5 / 2 / 3 / 5 / 7 / 10 / 15 / 20 / 25 / 30 / 40 / 50 | LSZH / OFNP / OFNR |
Every polarity × jacket × length combination in this matrix is orderable. Custom lengths between or beyond these steps, and pulling eyes, are quoted on the drawing.
BWN-CV-M12APC-2M4PC-OM4-8F-VIO-{POL}-{JKT}-{LEN}
Why Source from BWNFiber
- Factory-terminated MPO ends on every leg, end-face inspected before shipment
- Interface count and live-fiber count are both written in the product name — 8 live fibers, never sold as 12
- Conversion map, polish pair and polarity are confirmed against your drawing before production
- Lengths from 1 m to 50 m on the catalog set, exact project lengths on the drawing
- Jacket options LSZH, OFNP and OFNR
- OEM print, labels, fiber-map records and IL/RL reports for project handover
View the complete MPO conversion cable series for the other maps and fiber types in this family.
Frequently Asked Questions
Why does an MPO-12 title say 8 Fibers?
The ferrule has 12 positions, but only eight fibers are live into the two MPO-4 legs. The four center positions stay dark. The name states the interface and the live count so the cable is never mistaken for a 12-fiber link.
Is this the same as an MPO-8 to 2x MPO-4 conversion cable?
Same 8-fiber job on different hardware. This page uses a 12-position MPO ferrule; the MPO-8 build uses a true 8-position ferrule. Match the ferrule to the panel or cassette you plug into — both builds sit in the same conversion cable series.
Why is the polish APC on one end and PC on the other?
That is the official configuration of this SKU: APC on the MPO-12 end, PC on the two MPO-4 legs. Verify both mating ports before ordering, and never mate APC to PC on one connection.
Can I change polarity or pin gender after installation?
No. The conversion body is factory-wired to Type A, B or C per the drawing, and gender is fixed when the connectors are built. Confirm the channel map before production.
Is this an 800G or SR8 cable?
No. It is an 8-fiber OM4 conversion assembly. SR8-class conversion uses the MPO-16 to 2x MPO-8 map on a different page in this series. Do not order this SKU for an SR8 map.
What lengths are listed?
1 m to 50 m across 13 stock steps, with custom lengths and pulling eyes quoted on the drawing.
Related Products
Explore additional fiber optic products related to this item and suitable for similar network deployment needs.