Mini Compact Type Fiber Optic Splice Closure Model: SJ-Small

Mini Fiber Optic Splice Closure is made of high-quality ABS material. Mini Fiber Optic Splice Closure is designed to offer a flexible solution for splicing and branch off fibre optic cables in all environments. There is silicone sealing gasket between the cover and bottom. Mini Fiber Optic Splice Closure in the field with all types of different cables and splicing tools, supply the warranty for a trouble free installation.

Name	Fiber Cable Joint Box
Model	SJ-Small
Size	230X185X85mm
Cable Hole	2 In 2 Out, 4 ports
Sealing Structure	Silicon Gum material Sealing
Material	PP
Max Capacity	48 Cores, 4 x 12F Tray
Cable Diameter	For Φ2~Φ9mm
Installation	Wall mount
Protection Grade	IP65
Packing information	Size: 54X55X46CM,  20 PCS/CTN, G.W.:18KGS

Features

1.The Parts of Splice Tray
A.Splice Module with 4 Cable ties 2.4 X 92mm
B.Splice Organizer
C.Box Size:230×185×85mm L×W×D

2.Installation Procedure:

2.1 Cable Preparation

(1)Cable Sequentially through Sealing Nut, Sealing Claws, Seal and through the Closure Bottom Case, allow appropriate fiber lengths for placement within the Splice Tray.
(2)Tighten the Sealing Nut, and then proceed with stripping of fiber cable inside the Closure Bottom Case.
(3)Repeat steps(1)and(2)until cable preparation is complete.

2.2Cable Fixation

(1)Loosen the Sealing Nut,adjust cable to the appropriate length, and tighten the Sealing Nut to fix cable in place.
(2)Repeat step(1)for rest of the cable to complete this procedure.
*Caution:(1)For non-functional entrance ports, brown solid plugs provided are to be used with the sealing assembly to ensure a good seal.
(2)Solid plugs should protrude the outer edge of the Sealing Nut by 1-3mm for a complete seal.

2.3 Fiber Placement and Splicing

(1) Use Cable Ties to fix the fiber-containing PVC soft tubing onto the Splice Tray, and fix the Splice Organizer onto the Splice Tray.
(2) Place fiber within the Splice Tray, made sure fiber lengths are correct for splicing work and placement after splicing.
(3) After each individual fiber pair is spliced, place the splice joint onto the grooves of the Splice Organizer and the extra fiber on and around the Splice Tray.
(4) After all splicing work is complete, coat the grooves on Splicing Organizer with a layer of silicon gel for protection of splicing joints.

2.4 Closure Assembly
(1)After placing all splice fibers within Splice Trays, put the transparent Splice Tray Cover over the topmost Splice Tray, and use the Fixing O-Ring to fix the cover and the Splice Trays.

(2) Fix the Un-leaking O-Ring on the appropriate groove of the Closure Bottom Case, and place the Upper Closure over the bottom case, and then tighten the 8 sets of closure assembly screws to complete closure assembly.

(3)Perform a final seal tightness check for:
* Sealing Nuts on entrance ports (non-functional ports should have solid plugs in place of cable)
*8 Sets of closure assembly screws.

2.5 Opening the Closure
(1) Before opening, clean all closure surfaces.
(2) Follow procedure 2.4 in reverse order to open the closure. After necessary work is completed, follow procedure 2.4 to reassemble the closure.

Application

CATV networks
Optical fiber communication
FTTX
Fiber optic network convergence
Optical fiber access network
Widely used in FTTH access network
Telecommunication networks
Data communications networks
Local area networks
Aerial, Direct buried, underground, pipeline, hand-holes, duct mounting, wall mounting.