SJ-FTTH-SS-1 1 Port Fiber Optic Faceplate, 86 × 115 mm

SJ-FTTH-SS-1 Specifications

Key Features

• Vertical 86 × 115 mm format — the plate style used by PTO-type termination outlets: one port, one subscriber connection.
• Single SC port — the standard subscriber interface for FTTH drops; tell us PC or APC when ordering.
• Termination inside — the incoming cable is fixed and spliced behind the plate, with surplus fiber stored out of sight.
• Deep 23 mm base — room for the splice and slack behind the plate.
• ABS+PC housing — rigid, white, home and office friendly finish.
• Rated −40 °C to +70 °C — covers corridors and plant rooms as well as living spaces.

Where the SJ-FTTH-SS-1 Fits

• FTTH subscriber outlets — the wall point where the {DROP} terminates and the subscriber patches to the ONU.
• PTO-style installations — projects standardized on the vertical termination-outlet plate format.
• Single-dwelling and multi-dwelling units — one plate per subscriber, fed from the building distribution point.

Prefer the slim 86-style format? See the SJ-FTTH-MN-3 (14 mm). Need surplus-fiber storage and published optics? See the SJ-FTTH-MN-5 rosette box. Full range: Fiber Wall Socket category.

Installation Notes

• Fix the faceplate to the wall with screws; clamp the incoming cable before splicing.
• Splice or field-terminate to the SC pigtail, seat the adapter, and coil surplus fiber in the 23 mm base with controlled bends.
• Keep the adapter dust cap in place until the subscriber patch cord is connected.
• For general wall-outlet mounting, see how to install a fiber wall socket in your house.

1-Port Plates in the Range

Full range: Fiber Wall Socket category