SJ-FTTH-SK-8 Technical Specifications
| Model | SJ-FTTH-SK-8 |
| Enclosure Material | ABS plastic |
| Maximum Splicing Capacity | 4 splices |
| Supported Adapter Format | SC simplex or LC duplex |
| Compatible Incoming Cable | Indoor drop fiber cable |
| Operating Temperature | -25 °C to +60 °C |
| Color | White |
| Mounting | Screw-fixed wall mount |
| Dimensions | 100 × 85 × 27 mm |
Configuration note: The listed enclosure material is ABS plastic. Adapter type, connector polish, pigtails and included accessories can vary by project configuration. Confirm the BOM, drawing or approved sample before placing a production order.
Product Overview
SJ-FTTH-SK-8 is designed for indoor fiber termination at FTTH and FTTx subscriber endpoints. The enclosure provides space for fiber splicing, protected routing and cable storage while presenting SC simplex or LC duplex adapter positions at the wall outlet.
Typical Applications
- Indoor FTTH and FTTx subscriber termination
- Residential, office and commercial-building fiber outlets
- FTTD and FTTO endpoint installations
- Low-count SC or LC fiber termination using indoor drop cable
Installation and Acceptance Checks
- Confirm the cable entry direction, mounting surface and available wall space before installation.
- Route and store the drop cable without exceeding the cable manufacturer’s minimum bend radius.
- Secure the incoming cable and protect splices from strain, pinching and connector contamination.
- Match the adapter and connector polish to the project design; do not mix APC and UPC interfaces.
- Inspect and clean connector end faces, then complete the project-specified optical acceptance tests.
What to Confirm Before Ordering
- Required quantity and delivery destination
- SC simplex or LC duplex adapter configuration
- APC or UPC connector polish
- Pigtail type, fiber type and requested length
- Incoming cable type and preferred cable entry direction
- Included adapters, pigtails, sleeves, mounting hardware and labeling
- Datasheet, dimensional drawing, sample or OEM packaging requirements
Send BWNFiber your BOM, endpoint drawing or reference model for a configuration review. You can also compare additional fiber wall sockets and FTTH optical outlets.
Which Wall Outlet Fits Your Project?
| SK-9 | SS-2C | SK-8 (this model) | |
|---|---|---|---|
| Format | 86 × 86 mm faceplate, 10 mm slim | Socket with transparent flip cover, 86 × 115 × 23 mm | Enclosed outlet box, 100 × 85 × 27 mm |
| Capacity | 2F SC / 4F LC, adapters + pigtails included | 1 adapter position, SC duplex, 2 fibers | 4 splices, SC adapters + pigtails included |
| Cover | Flat dust-proof plate | Rotating transparent cover, laser warning label | Enclosed box with splice storage |
| Best for | Standard 86 wall points, homes and desks | Subscriber sockets needing a safety cover | 4-fiber termination with splice storage |
Full range: Fiber Wall Socket category · SJ-FTTH-SK-9 → · SJ-FTTH-SS-2C →
