SJ-FTTH-MN-1-LC-UPC 2 Port LC Fiber Wall Socket Box

SJ-FTTH-MN-1-LC-UPC Specifications

Key Features

• LC duplex density — two LC/UPC duplex ports present up to four fibers on one 86 plate, double the density of SC simplex.
• Made for FTTD and enterprise — the standard choice where desk outlets and office cabling use LC patching.
• Standard 86-type format — fits common 86 back boxes; no custom plates or wall cut-outs.
• Termination and storage in one plate — the base fixes the incoming cable, protects the splice and stores surplus fiber.
• Family consistency — the same housing comes with SC/APC and SC/UPC options, so projects can standardize the look and vary the connector.
• Rated −40 °C to +70 °C — covers corridors and plant rooms as well as offices.

Where the SJ-FTTH-MN-1-LC-UPC Fits

• Fiber to the desk (FTTD) — high-density desk outlets fed by indoor LC cabling.
• Enterprise rooms — multi-fiber wall points where LC duplex is the patching standard.
• Apartment entry points — where the {DROP} terminates and structured cabling begins.

Need SC instead of LC? See the SC/APC and SC/UPC versions in the series table below. Need factory-fitted adapters with pigtails? See the SJ-FTTH-SK-9 86 faceplate. Full range: Fiber Wall Socket category.

Installation Notes

• Fix the socket to the wall or a standard 86 back box with screws; clamp the incoming cable before terminating.
• Terminate fibers to LC pigtails or field connectors, then seat the duplex adapters — note the duplex clip orientation before clicking in.
• Keep bends above the minimum bend radius inside the 22 mm base.
• For general wall-outlet mounting, see how to install a fiber wall socket in your house.

The MN-1 Series: Same Housing, Three Connector Options

Same 86 × 86 × 22 mm housing across the series — pick the connector, keep the look. Full range: Fiber Wall Socket category