This MPO 12 fiber OM4 male to LC simplex breakout cable connects one pinned MPO-12/PC interface to twelve individual LC/UPC connectors. The supplied configuration uses violet OM4 multimode cable. Select it for a documented twelve-fiber fanout where the mating MPO connector is unpinned and each LC termination has an assigned destination.
Product Overview
The twelve simplex branches let an installer identify and route individual fiber paths. They do not arrive as six mechanically paired LC duplex connectors. If the receiving equipment uses duplex ports, specify the required pairing, connector spacing and retention arrangement before approving this build.
This page describes the male, twelve-fiber OM4 configuration. For other fiber counts, connector arrangements or fiber types, use the MPO breakout and harness cable range.
Specification disclaimer: The supplied document establishes the proposed product identity, not approved production limits. Final BOM, dimensions, optical acceptance criteria and available options: confirmation with BWNFiber.
Key Features
- One MPO-12/PC male connector, with alignment pins, to 12 × LC/UPC simplex connectors.
- Twelve OM4 50/125 μm fiber paths; violet jacket specified in the supplied configuration.
- Individual LC terminations for a drawing-controlled branch-to-port schedule.
- Factory-selected polarity; field polarity switching is not offered in the supplied description.
- Source-listed metric lengths from 1 to 50 m, subject to configuration confirmation.
- One controlled order schedule for polarity, length, jacket and branch layout.
Technical Specifications
| Parameter | Supplied configuration or approval requirement |
|---|---|
| Document reference | 9; source-document number, not a verified manufacturer SKU |
| Product family | MPO breakout / harness cable |
| End A | MPO-12/PC, male / pinned |
| End B | 12 × LC/UPC simplex |
| Fiber count and type | 12 fibers; OM4 multimode, 50/125 μm |
| Jacket color | Violet |
| Cable diameter | 3.0 mm listed; final construction and tolerance: confirmation with BWNFiber |
| Overall length requests | 1 / 1.5 / 2 / 3 / 5 / 7 / 10 / 15 / 20 / 25 / 30 / 40 / 50 m |
| Branch length requests | 30 / 45 / 60 cm listed; no default approved by this draft |
| Branch construction | Simplex; diameter, bend radius and retention detail: confirmation with BWNFiber |
| Polarity requests | Type A / B / C listed; actual MPO-position-to-LC-label map requires approval |
| Jacket requests | LSZH / OFNP / OFNR listed; availability and installation documentation: confirmation with BWNFiber |
| Optical acceptance | Maximum insertion loss, minimum return loss, wavelength, reference method and measurement scope: confirmation with BWNFiber |
| Mechanical/environmental limits | Bend radius, pull limit, temperature and mating durability: confirmation with BWNFiber |
| Standards and declarations | Applicable standards, editions, scope and evidence for this build: confirmation with BWNFiber |
Selection Guidance
Check the connector behind the adapter
The male MPO end must mate with a compatible female MPO connector. Identify that connector even when it sits behind a panel adapter or inside a cassette. The adapter name alone does not establish pinning, end-face polish or key orientation. Do not mate two pinned connectors or combine incompatible end-face geometries.
Fluke Networks explains MPO pinning and fiber polarity. Use the actual endpoint documentation to approve a connection; the reference does not certify this assembly for a particular transceiver.
Specify twelve individual destinations
On the drawing, identify the MPO end-view direction, key orientation and positions 1–12. Assign a unique LC branch label and destination to each position. If two branches form a transmit/receive pair, record that pair explicitly. A count of twelve fibers is not a claim of twelve duplex links.
| Build being compared | Physical termination | Buyer decision |
|---|---|---|
| This configuration | Pinned MPO-12 to twelve LC simplex connectors | Choose when individual LC routing and male MPO mating are required |
| Six-duplex arrangement | Twelve fibers organized into six LC pairs | Specify a separate duplex build when clips, pairing or port spacing require it |
| Eight-active-fiber SR4 breakout | Application-specific fiber population and branch pairing | Approve module, host breakout mode and lane map separately |
These are configuration distinctions, not confirmation that every alternative is available from BWNFiber. A passive harness routes optical paths; it does not convert a protocol or guarantee a data rate.
If the required assembly type is unclear, compare the MPO cable types and connection roles before specifying this item.
Approve the complete polarity map
Type A, B or C alone cannot identify every branch destination after cassettes and trunks are added. Use the MPO polarity checklist for the complete channel record. Request the selected assembly’s position map and verify transmit-to-receive continuity against the endpoint plan.
Define dimensions and acceptance before quoting
State where overall length starts and ends, whether branch lengths are equal or staggered, and the required tolerances. Include the breakout transition and installed routing space. A listed overall length does not establish the reach of the longest branch or a permitted installation bend radius.
Evidence required for order release
Request the approved drawing revision, BOM, branch-label schedule, jacket identification and acceptance plan. Agree whether loss limits cover a mated connection or the complete assembly. Specify test wavelengths, reference method, end-face inspection criteria and which per-fiber records must accompany the order. Available testing and reporting scope: confirmation with BWNFiber.
Applications
| Selection scenario | Required approval |
|---|---|
| Compatible female MPO cassette interface to individual LC ports | Cassette connector pinning, polish, fiber map and branch reach |
| Twelve-fiber OM4 distribution with separate LC destinations | Labels 1–12 linked to the destination schedule |
| Panel-side transition to equipment with paired transmit/receive ports | Correct branch pairing, mechanical fit, channel budget and equipment documentation |
These are potential applications, not customer case studies. Do not select this male connector for a pinned equipment interface. OM4 fiber and violet color alone do not prove a speed, distance or host compatibility.
Order Guide
Keep the twelve-fiber OM4 identity, male MPO-12/PC end and twelve LC/UPC simplex ends fixed for this item. Submit one line per requested configuration.
| Order field | Information to provide |
|---|---|
| Identity | Document 9 and approved product/BOM revision |
| Mating interface | Endpoint part number, female MPO pinning, polish and key orientation |
| Fiber mapping | MPO end view, LC branch labels and destination ports |
| Polarity | Requested Type A / B / C plus approved position map |
| Overall length | Source-listed metric length, measurement points and tolerance |
| Fanout | Branch length, equal/staggered layout and transition position |
| Jacket | Requested designation, installation location and destination requirements |
| Acceptance | Loss limits, test scope, inspection requirements and records |
| Commercial inputs | Quantity per build, sample request, delivery destination and required date |
The source lists 117 combinations: three polarities × three jackets × thirteen lengths. These are quotation candidates, not verified stock or approval of every combination. Custom lengths, 0.9 mm legs, pulling eyes, labels and packaging requests require a drawing review: confirmation with BWNFiber. MOQ, price and lead time also require a quotation.
Use meters as the controlling dimension. For example, 1 m is approximately 3.28 ft and 1.5 m is approximately 4.92 ft. Rounded feet in the original table must not become a second manufacturing dimension.
Why Source from BWNFiber
Ask BWNFiber to quote against the same drawing and branch schedule used by your installation and receiving teams. Request written exceptions where the proposed build differs from the requested pinning, mapping, jacket or acceptance criteria. This creates a clear basis for comparing a sample with the production order.
Factory inspection coverage, traceability, report availability, OEM capability and jacket compliance are not established by the supplied draft: confirmation with BWNFiber. No unsupported certification, delivery or performance promise is included here.
Need a Configuration Review or Sample?
Request a configuration review with reference 9, the mating interface, twelve LC destinations, polarity drawing, overall and branch lengths, jacket, quantity and delivery destination. Ask for a quotation identifying the proposed configuration, exceptions and available verification documents.
