Product Overview
This assembly brings eight OM3 fibers from a 12-position MPO interface to four LC duplex connections. The number of MPO positions describes the interface; it does not mean that all twelve positions are populated. Four duplex ends provide eight individual fiber terminations.
The supplied configuration identifies OM3 50/125 μm fiber, an unpinned MPO connector and LC/UPC duplex branches. The drawing must identify the populated MPO positions, viewing direction, key orientation and destination of every LC fiber. The phrase “Type B” alone does not identify the complete installed channel.
Configuration details below originate from the supplied product material. The controlled BOM, connector drawing and release specification are confirmation with BWNFiber. This configuration must also be reconciled with the other eight-fiber OM3 variants before a separate product URL is approved.
Key Features
- Twelve-position MPO interface with eight populated fibers.
- Four LC/UPC duplex ends for a four-pair connection.
- OM3 multimode fiber with an aqua jacket in the supplied definition.
- MPO-12/PC female connector; match its unpinned interface to the mating component.
- Type B and 3.0 mm LSZH construction fixed for this configuration request.
- Overall cable length and breakout dimensions specified separately on the order drawing.
Technical Specifications
| Item | Configuration supplied for review |
|---|---|
| Product family | MPO breakout / harness cable |
| MPO end | MPO-12/PC, female / unpinned |
| Interface positions / populated fibers | 12 positions / 8 fibers |
| Branch ends | 4 × LC/UPC duplex; 8 individual fiber terminations |
| Fiber | OM3 multimode, 50/125 μm |
| Cable color | Aqua |
| Main cable construction | LSZH, 3.0 mm outside diameter |
| Polarity designation | Type B; exact MPO-to-LC map confirmation with BWNFiber |
| Overall lengths listed in source | 1–50 m; availability and measurement tolerance confirmation with BWNFiber |
| Fanout lengths listed in source | 30 / 45 / 60 cm; measurement datum, leg construction and availability confirmation with BWNFiber |
| Insertion / return loss | Limits, wavelengths, reference method and selected grade confirmation with BWNFiber |
| Mechanical and environmental limits | Bend radius, tensile load and temperature limits confirmation with BWNFiber |
| Compliance | Applicable standards, declarations and jacket rating evidence confirmation with BWNFiber |
Fiber-map approval
Request a drawing that records MPO face orientation and positions, LC pair numbers, and the transmit-to-receive path at the equipment. The source refers to an SR4 arrangement with the center four MPO positions unused; this must be checked against the actual assembly drawing before it becomes an ordering instruction.
Selection Guidance
Confirm the application before the cable length
For a supported parallel-optics breakout, verify the exact switch, port mode, transceiver part numbers and receiving interfaces. A passive harness routes fibers; it does not convert an unsupported port into four independent channels. A matching QSFP or QSFP28 housing is not sufficient evidence of compatibility.
Manufacturer documentation describes supported 40G-to-four-10G and 100G-to-four-25G examples. Those examples do not qualify every module or this BWNFiber configuration. Confirm the current equipment compatibility documentation, lane rates and complete channel loss budget. See Cisco’s explanation of optical breakouts.
Keep the build identity consistent
This request fixes Type B, LSZH and the 3.0 mm main cable. A change to polarity, jacket rating, connector pinning or branch construction requires a revised configuration and drawing. Do not retain an LSZH product description on an OFNP or OFNR order line. A jacket material description alone does not establish suitability for a particular building route.
| Buyer requirement | Selection consequence |
|---|---|
| Four duplex connections using eight fibers | Review this configuration and its lane map |
| Six duplex connections using all twelve fibers | Select a full twelve-fiber harness instead |
| LC uniboot branches | Confirm a separate branch construction; do not assume this clip-style request includes uniboot |
| Single-mode optical channel | Select a compatible single-mode assembly; this OM3 build is not an OS2 substitute |
| MPO-to-MPO link without LC branches | Use the appropriate MPO trunk or MPO patch-cord family |
For complete channel planning, use the MPO polarity checklist. Keep the detailed channel worksheet with the project rather than inferring a map from this product title.
Applications
- A supported parallel-optics connection to four LC duplex endpoint pairs, after the module and switch-mode review.
- An OM3 patching installation that needs eight mapped fibers between an MPO interface and LC equipment ports.
- A repeat-order BOM requiring a fixed jacket, polarity designation and branch destination list.
The ordered cable length is a physical dimension, not a guaranteed transmission distance. Include all trunks, adapters, patch cords and connections when assessing the optical path.
Order Guide
Use metric length as the controlling dimension. The following are the source-listed LSZH length requests, with calculated feet rounded to two decimals. Listed lengths do not establish inventory, MOQ or lead time.
| Overall length (m) | Approximate feet | Fixed jacket |
|---|---|---|
| 1 | 3.28 | LSZH |
| 1.5 | 4.92 | LSZH |
| 2 | 6.56 | LSZH |
| 3 | 9.84 | LSZH |
| 5 | 16.40 | LSZH |
| 7 | 22.97 | LSZH |
| 10 | 32.81 | LSZH |
| 15 | 49.21 | LSZH |
| 20 | 65.62 | LSZH |
| 25 | 82.02 | LSZH |
| 30 | 98.43 | LSZH |
| 40 | 131.23 | LSZH |
| 50 | 164.04 | LSZH |
Specify the total length, measurement endpoints, fanout length for each leg and allowed tolerance. Other lengths, staggered branches, pulling hardware and labeling are requests for feasibility review; availability is confirmation with BWNFiber.
The supplied order-code pattern is BWN-BO-M12PCF-4LCDX-8F-OM3-AQUA-B-LSZH-{LEN}. It is a proposed identifier, not a verified production SKU. Request the approved part number on the quotation.
Why Source from BWNFiber
A useful quotation for this assembly should identify the connector drawing, populated-fiber map, cable construction and branch dimensions under one configuration reference. Request those documents with the proposed BWNFiber part number so purchasing and installation teams review the same build.
Quality and documentation review
Ask for the applicable end-face inspection record, continuity and polarity verification, and optical test report with limits, wavelengths and measurement reference. Product-specific test coverage, report availability and traceability are confirmation with BWNFiber. A generic standards list or family-level performance value is not a test result for this assembly.
Request applicable conformity documents only for the selected construction and destination. Certification status, sample availability, minimum order quantity and delivery schedule are confirmation with BWNFiber and should be stated on the quotation.
Browse MPO breakout and harness cable families when a different fiber count or branch format is required.
Need a Configuration Review or Sample?
Send the equipment part numbers, port mode, MPO-to-LC map, overall and branch lengths, route requirements, quantity and destination. Ask BWNFiber to identify any missing data and quote the reviewed configuration with its drawing revision and available acceptance records.
