NEW DESIGN Pre-Polished Fiber Optic Fast Connector Easily Installed For Drop Cable 3.0×2.0 & 2.0×1.6 and Patch Cable 3.0MM Model: MBN-FOFC-M50-UPC

Bwinnwes makes the LC fast connector. These are great for single-mode cable termination and include a pre-polished fiber stub, gel, and strain relief boots. Unlike some connectors, LC fast connectors don’t need a soldering iron and can be installed in under one minute. If you’re looking for a fiber optic fast connector for drop cable, you’ve come to the right place. Click the following button for a quick quote.

  • Model: MBN-FOFC-M50-UPC
  • Suitable cable: drop cable of 3.0mmx2.0mm, 2.0×1.6mm and 3.0mm patch cable
  • Insertion Loss (dB): Max.≤0.5dB, Typical≤0.3dB
  • Return Loss (dB): Max.APC≤-50dB, Typical≤-55dB
    Max UPC≤-40dB, Typical≤-45dB

MBN-FOFC-M50-UPC Pre-Polished Fiber Optic Fast Connector

FTTH applications require Fast Connect Fiber Connectors. They can reduce field time and labor costs by ninety percent. Bwnfiber Fast Connect Fiber Connectors are a 2021 new style that can be used to terminate fiber optic cable, reducing field time and labor costs by ninety percent. Unlike the traditional styles, fast fiber connectors do not require fusion splicers or power supplies, and their small size and ease of installation make them an excellent choice for FTTH applications. In addition to these advantages, they are cost effective, easy to install and terminate, and do not require special tools. They are easy to use and can be terminated by hand without splicing connectors, which makes them extremely versatile.

For proper assembly, you should apply slight pressure to the fiber, ensuring that it is firmly against the internal pre-polished fiber. After the fiber has been properly placed, squeeze the wedge unit to release it from the connector body. Then slide the locking piece out of the wedge. Finally, the connector housing will snap into place.

One of the most commonly used connectors for fiber optic networks is the SC connector. This type features a spring-loaded keyed design and a bayonet mount. It also features a long cylindrical 2.5mm ferrule. The SC connector is another common type of fast fiber connector, and is a low-cost option.

Application

  • Fiber optic communication systems and telecommunication networks
  • Fiber optic data transmission
  • CATV
  • Patch Panels
  • Optical access network
  • Fiber to the Subscriber (FTTx) applications
  • Optical cable interconnection
  • Maintenance or emergency restoration of fiber networks
  • Field Repair/Replacement
  • Fiber optic equipment
  • FTTx Applications
Item No.Item NameSpec. Value
1Insertion Loss (dB)  Max.≤0.5dB, Typical≤0.3dB
2Return Loss (dB)  Max.APC≤-50dB, Typical≤-55dB

Max UPC≤-40dB, Typical≤-45dB

3Ferrule End Face  A Zone no scratches at 400X
43D Interferometry  Complies to IEC 2009
5Average Assembling Time  ≤ 3 min
6First-Time Done Yield Rate  ≥ 95%
7Re-Operation Times  Max. 5 times
8Repeatability (±0.2dB)  ≥ 90%
9Tensile Strength  >30N