Optical Fiber Fast Connector SC/APC for drop cable 3.0×2.0mm and 3.0mm patch cable Model: MBN-FOFC-L52-APC
MBN-FOFC-L52-APC Optical Fiber Fast Connector is used for drop cables termination, widely usedd in FTTX nwewor building. When choosing a fiber optic fast connector, consider the type of connection you want. The type of fiber inside the cable determines the type of end connector. These connections typically go to an optical transmitter or receiver or to a terminal box. You’ll want to choose a connector with good alignment and very little light loss, and the quality of the assembly will determine how long the connector will stay in place. If you have any demands in quick connector, email us for quick quotation.
- Model: MBN-FOFC-L52-APC
- Suitable cable: drop cable of 3.0mmx2.0mm, 2.0×1.6mm and 3.0mm patch cable
- Insertion Loss (dB): Max.≤0.5dB, Typical≤0.3dB
- Return Loss (dB): Max.APC≤-50dB, Typical≤-55dB
Max UPC≤-40dB, Typical≤-45dB
MBN-FOFC-L52-APC Optical Fiber Fast Connector SC/APC
Bwnfiber MBN-FOFC-L52-APC Optical Fiber Fast Connector is a passive device for connecting two optical paths. It offers high performance and high durability. It can be installed and maintained quickly and easily. The quick connector is suitable for use on site, and it has low connection error rate. This connector can enhance the performance of any business.
MBN-FOFC-L52-APC Optical Fiber Fast Connector features factory-polished ferrules that eliminate the need for hand polishing in the field. Its mechanical splice body features a factory-mounted fiber stub and a pre-polished ceramic ferrule. Installing a Fast connector station takes less than 30 seconds, which includes fiber preparation time. Optical Fiber Fast Connector require standard fiber preparation tools; however, APC variants may require additional tooling.
Application
- Fiber optic communication systems and telecommunication networks
- Fiber optic data transmission
- CATV
- Patch Panels
- Optical access network
- Fiber to the Subscriber (FTTx) applications
- Optical cable interconnection
- Maintenance or emergency restoration of fiber networks
- Field Repair/Replacement
- Fiber optic equipment
- FTTx Applications
| Item No. | Item Name | Spec. Value |
| 1 | Insertion Loss (dB) | Max.≤0.5dB, Typical≤0.3dB |
| 2 | Return Loss (dB) | Max.APC≤-50dB, Typical≤-55dB
Max UPC≤-40dB, Typical≤-45dB |
| 3 | Ferrule End Face | A Zone no scratches at 400X |
| 4 | 3D Interferometry | Complies to IEC 2009 |
| 5 | Average Assembling Time | ≤ 3 min |
| 6 | First-Time Done Yield Rate | ≥ 95% |
| 7 | Re-Operation Times | Max. 5 times |
| 8 | Repeatability (±0.2dB) | ≥ 90% |
| 9 | Tensile Strength | >30N |
Bwinners
