FTTH SC APC SM Green Fast Connector Model: MBN-FOFC-H-APC
FTTH SC APC SM green fast connector are the latest high-tech, low-cost connectors to replace traditional electrical crimp (LC) fasteners. The fast connector can be used to connect two fiber cable simultaneously, saving time and cost. At the same time it ensures that the joint is tight and stable These innovative products are 100% waterproof and offer the best possible protection for optical fibers, cables and equipment. Bwnfiber provides fiber cable fast connector at a competitive price, with good quality. Email us if you have demands in fiber optic fast connector.
- Model:MBN-FOFC-H-APC
- Connector Type: SC
- Polishing: APC
- Fiber Mode: 9/125μm Singlemode
- Cable Diameters: 0.9/2.0/3.0mm or 3.0×2 Drop Cable
- Ferrule: Ceramic
- Coating Diameter: 250μm & 900μm
- Operation Time: about 15s（exclude fiber presetting)
- Insertion Loss: PC≤ 0.3dB,UPC≤ 0.2dB,APC≤ 0.2dB
- Return Loss: PC≤ -40dB, UPC≤ 50dB, APC≤ 60dB
MBN-FOFC-H-APC FTTH SC APC SM Green Fast Connector
The MBN-FOFC-H-APC Sc Apc Fast Connector Fiber Optic is factory pre-polished, field-installable connectors that eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub, and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers.
Features
- Quick, easy, and clean solution for fiber terminating connectors.
- Precision mechanical alignment ensures low insertion loss.
- It can be installed within two minutes, including preparation time.
- The high success rate of connection, Superior optical performance.
- The simple assembly process, and convenient operation.
- No epoxy and polishing are required, reducing installation time.
- Stable optical performance is achieved through its use of V-groove mechanical splice technology.
| Name | FTTH SC APC SM Green Fast Connector |
| Model | MBN-FOFC-H-APC |
| Connector Type | SC |
| Polishing | APC |
| Fiber Mode | 9/125μm Singlemode |
| Cable Diameters | 0.9/2.0/3.0mm or 3.0×2 Drop Cable |
| Ferrule | Ceramic |
| Coating Diameter | 250μm & 900μm |
| Operation Time | about 15s (exclude fiber presetting) |
| Insertion Loss | PC≤ 0.3dB,UPC≤ 0.2dB,APC≤ 0.2dB |
| Return Loss | PC≤ -40dB, UPC≤ 50dB, APC≤ 60dB |
| Repeat-ability | <0.1dB (1000 times) |
| Tension Test | 60N |
| Operating Temperature | -40°C~+85°C |
| On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
| Mechanical Durability（500 times) | IL ≤ 0.3dB |
| Drop Test（4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB |
| Remark: Ferrule Concentricity SM< 1um; MM< 1.4um Ferrule inner diameter tolerance +1/-0um Ferrule outer diameter tolerance +/-0.5 um | |
Bwinners
