- Model:MBN-FOFC-FC2-APC
- Connector Type: FC
- Polishing: APC
- Fiber Mode: 9/125μm Singlemode
- Cable Diameters: 0.9/2.0/3.0mm or 3.0×2 Drop Cable
- Ferrule: Ceramic
- Coating Diameter: 250μm & 900μm
- Operation Time: about 15s（exclude fiber presetting)
- Insertion Loss: PC≤ 0.3dB,UPC≤ 0.2dB,APC≤ 0.2dB
- Return Loss: PC≤ -40dB, UPC≤ 50dB, APC≤ 60dB
Something about MBN-FOFC-FC2-APC fiber optic fast connector you need to know
The MBN-FOFC-FC2-APC FC APC Fiber Optic Connectors is factory pre-polished, field-installable connectors that eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub, and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers.
Features
- Quick, easy, and clean solution for fiber terminating connectors.
- Precision mechanical alignment ensures low insertion loss.
- It can be installed within two minutes, including preparation time.
- The high success rate of connection, Superior optical performance.
- The simple assembly process, and convenient operation.
- No epoxy and polishing are required, reducing installation time.
- Stable optical performance is achieved through its use of V-groove mechanical splice technology.
| Name | FC APC Fiber Optic Connectors |
| Model | MBN-FOFC-FC2-APC |
| Connector Type | FC |
| Polishing | APC |
| Fiber Mode | 9/125μm Singlemode |
| Cable Diameters | 0.9/2.0/3.0mm or 3.0×2 Drop Cable |
| Ferrule | Ceramic |
| Coating Diameter | 250μm & 900μm |
| Operation Time | about 15s (exclude fiber presetting) |
| Insertion Loss | PC≤ 0.3dB,UPC≤ 0.2dB,APC≤ 0.2dB |
| Return Loss | PC≤ -40dB, UPC≤ 50dB, APC≤ 60dB |
| Repeat-ability | <0.1dB (1000 times) |
| Tension Test | 60N |
| Operating Temperature | -40°C~+85°C |
| On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
| Mechanical Durability（500 times) | IL ≤ 0.3dB |
| Drop Test（4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB |
| Remark: Ferrule Concentricity SM< 1um; MM< 1.4um Ferrule inner diameter tolerance +1/-0um Ferrule outer diameter tolerance +/-0.5 um | |
