FTTH SC UPC SM Blue Optical Fiber Fast Connector Model: MBN-FOFC-B55-UPC
FTTH SC UPC SM blue optical fiber fast connector is mainly used to connect the fiber optic cables. It is widely used in telecommunication, intelligent control and monitoring system. The working principle of optical cable fast connector is a simple, easy and convenient way to install fiber optic cable at the same time avoiding the damage caused by poor quality crimp tools and bad workmanship. If you are looking for fiber optic sc fast connector at a bulk price, please don’t hesitate to contact us for a quick quotation.
- Connector Type: SC
- Polishing: UPC
- Fiber Mode: 9/125μm Singlemode
- Cable Diameters: 0.9/2.0/3.0mm or 3.0×2 Drop Cable
- Ferrule: Ceramic
- Coating Diameter: 250μm & 900μm
- Operation Time: about 15s（exclude fiber presetting)
- Insertion Loss: PC≤ 0.3dB,UPC≤ 0.2dB,APC≤ 0.2dB
- Return Loss: PC≤ -40dB, UPC≤ 50dB, APC≤ 60dB
MBN-FOFC-B55-UPC FTTH SC UPC SM Blue Optical Fiber Fast Connector
The MBN-FOFC-B55-UPC SC/UPC Optical Fiber Fast Connector is factory pre-polished, field-installable connectors that eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub, and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers.
- Quick, easy, and clean solution for fiber terminating connectors.
- Precision mechanical alignment ensures low insertion loss.
- It can be installed within two minutes, including preparation time.
- The high success rate of connection, Superior optical performance.
- The simple assembly process, and convenient operation.
- No epoxy and polishing are required, reducing installation time.
- Stable optical performance is achieved through its use of V-groove mechanical splice technology.
|Name||FTTH SC PC SM Blue Optical Fiber Fast Connector|
|Fiber Mode||9/125μm Singlemode|
|Cable Diameters||0.9/2.0/3.0mm or 3.0×2 Drop Cable|
|Coating Diameter||250μm & 900μm|
|Operation Time||about 15s (exclude fiber presetting)|
|Insertion Loss||PC≤ 0.3dB,UPC≤ 0.2dB,APC≤ 0.2dB|
|Return Loss||PC≤ -40dB, UPC≤ 50dB, APC≤ 60dB|
|Repeat-ability||<0.1dB (1000 times)|
|On-line Tensile Strength Test (20 N)||IL ≤ 0.3dB|
|Mechanical Durability（500 times)||IL ≤ 0.3dB|
|Drop Test（4m concrete floor, once each direction, three times total)||IL ≤ 0.3dB|
|Remark: Ferrule Concentricity SM< 1um; MM< 1.4um Ferrule inner diameter tolerance +1/-0um Ferrule outer diameter tolerance +/-0.5 um|