FTTH Drop Cable

GJYXFHA-1Xn / GJYXFHA-2Xn 1F / 2F Bow-Type Drop Cable for Duct

GJYXFHA-1Xn / GJYXFHA-2Xn 1F / 2F Bow-Type Drop Cable for Duct for FTTH subscriber drop. Confirm messenger, jacket and indoor/outdoor route against the source file.

Ftth Drop Cable FTTH Drop Fiber Optic Cable

GJYXFHA-1Xn / GJYXFHA-2Xn

Quick answer

The GJYXFHA-1Xn and GJYXFHA-2Xn references are candidate 1-fibre and 2-fibre bow-type drop-cable variants for duct access within BWNFiber’s armored outdoor FTTH drop-cable family. Do not approve a quotation from the family name alone. Confirm the exact order code, construction drawing, fibre grade, dimensions, mechanical limits, temperature range, delivery length, marking, and required records for the selected configuration.

Product-data hold: The supplied V4 and the current BWNFiber family page contain different numerical specifications. The values below remain TBC until BWNFiber issues or approves a controlled model datasheet.

GJYXFHA model status

Reference modelIntended fibre countConstruction statusNumerical specification statusRelease status
GJYXFHA-1Xn1F — BWNFiber confirmation requiredSupplied drawing shows a bow-type optical unit, parallel FRP members, inner LSZH layer, water-blocking tape, APL layer, added strength member, and PE outer jacketTBC — source requiredNot approved for publication or quotation
GJYXFHA-2Xn2F — BWNFiber confirmation requiredSame supplied construction representationTBC — source requiredNot approved for publication or quotation

Construction and application boundary

The supplied construction asset positions the bow-type optical unit inside additional water-blocking, moisture-barrier, reinforcement, and outer-sheath layers. This is materially different from a simple flat indoor bow cable. The drawing must be tied to the exact offered part number and revision before it is used as product evidence.

Do not infer direct-burial, aerial-span, fire-rating, UV, rodent, or standards compliance from the presence of APL, PE, LSZH, or FRP alone. The selected route and contract must be checked against the exact model documentation.

Technical specifications — controlled data required

FieldGJYXFHA-1XnGJYXFHA-2XnRequired source before release
Fibre countTBC (draft indicates 1F)TBC (draft indicates 2F)Ordering-code sheet
Fibre grade optionsTBCTBCApproved option matrix
Overall diameter and toleranceTBCTBCDatasheet / drawing
Reference massTBCTBCDatasheet
Tensile, long-/short-termTBCTBCTest/specification record
Crush condition and limitTBCTBCTest/specification record
Minimum bend, static/dynamicTBCTBCDatasheet
Installation temperatureTBCTBCDatasheet
Operating temperatureTBCTBCDatasheet
Storage temperatureTBCTBCDatasheet
Declared standards / methodsTBCTBCCompliance/test record

How to approve the correct configuration

  1. Map the complete route, including duct size, occupancy, access points, bends, pull length, indoor/outdoor transitions, and termination points.
  2. Confirm the exact fibre count and grade against the active network design and approved equipment assumptions.
  3. Match the complete construction, not only the family name: strength members, inner layer, water blocking, moisture barrier, additional reinforcement, and outer jacket.
  4. Compare dimensions and mechanical values only when their conditions and test methods are stated.
  5. Resolve every difference between the quotation, datasheet, drawing, sample, and purchase specification before order release.
  6. Record the approved part number, document revisions, accepted deviations, reel requirements, marking, and required inspection/test records.

Differences from related drop-cable products

Product roleMain distinctionCorrect use of the page
Simple flat indoor bow-type drop cableCompact indoor construction without the same outer protected buildUse for indoor pathway selection; do not borrow its dimensions or ratings.
Self-supporting aerial drop cableIncludes a documented support element and span-related applicationUse for aerial-route selection; do not assume GJYXFHA is self-supporting.
Generic 1–4 core armored outdoor FTTH drop cableBroad family owner covering protected outdoor/duct configurationsKeep as the canonical page; add GJYXFHA only as a verified model variant.
GJYXFHA-1Xn / -2XnExact candidate 1F/2F duct bow-type variantsUse the controlled model sheet for approval and quotation.

Testing and quality-control information

TBC — source required. Before publishing test statements, BWNFiber should identify the applicable method, specimen/configuration, condition, acceptance criterion, record type, and whether the record is a type test, routine test, sample inspection, or order-specific report. Do not promise OTDR, insertion-loss, return-loss, mechanical, environmental, or certification records unless their applicability and availability are confirmed.

Packaging and procurement information

TBC — source required for standard reel length, reel type, tolerances, cable marking, packing protection, documentation, MOQ, lead time, and warranty. These fields may vary by configuration and order; they should be confirmed in the quotation and purchase specification.

Required RFQ information

Send BWNFiber:

  • reference model: GJYXFHA-1Xn or GJYXFHA-2Xn;
  • fibre count and required fibre grade;
  • complete route and installation method;
  • duct size, occupancy, approximate pull length, bends, and access points;
  • required overall length, length per reel, and quantity;
  • cable marking and packaging requirements;
  • destination country and project/contract requirements;
  • required datasheet, drawing, test, inspection, and compliance records;
  • any acceptance criteria or approved equivalent requirements.

Document request area

  • Current model datasheet: TBC — source required
  • Approved construction drawing: TBC — source required
  • Ordering-code / option matrix: TBC — source required
  • Declared test methods and limits: TBC — source required
  • Order- or lot-specific records: subject to quotation and contract confirmation

CTA

Request the current GJYXFHA datasheet and configuration review. Include the exact reference model, route, fibre count and grade, reel lengths, quantity, destination, and required project documents. BWNFiber should confirm the offered configuration and evidence set before quotation approval.

FAQ

Missing FAQ and Improved Answers

These questions are appropriate as visible page content. Do not add FAQPage markup for Google: Google removed the FAQ rich-result feature in May/June 2026.

  1. Is GJYXFHA-1Xn the 1-fibre version and GJYXFHA-2Xn the 2-fibre version?
    The supplied V4 maps them that way, but the mapping must be confirmed against the current BWNFiber ordering-code sheet before publication or quotation.

  2. Is this model intended for duct installation?
    The model name and supplied construction asset identify a duct bow-type drop-cable design. The final route approval must still use the selected part number, duct conditions, installation method, and controlled datasheet.

  3. How does this model differ from the generic 1–4 core armored outdoor FTTH drop cable?
    GJYXFHA-1Xn/-2Xn should be treated as exact candidate variants within that broader family. The page must not imply identical dimensions or load ratings until the family table and model datasheet are reconciled.

  4. Which fibre grades can be ordered?
    TBC — source required. Publish only the grades explicitly mapped to the selected order code in a current BWNFiber-controlled document.

  5. What is the confirmed cable diameter and weight?
    TBC — source required. V4 and the existing live family page contain different values, so neither should be reused for this exact model without reconciliation.

  6. What tensile, crush, and bend limits apply?
    TBC — source required. The approved record must identify long-/short-term conditions, test method, units, bend state, and acceptance criteria.

  7. Does the APL layer make the cable suitable for direct burial?
    Not by itself. A moisture-barrier layer does not prove a direct-burial rating. Use this model only for installation methods documented for the exact configuration.

  8. Can the cable be used for aerial spans?
    TBC — the exact GJYXFHA configuration under review is positioned for duct use. Do not infer aerial suitability from another family page.

  9. What documents should be requested before approval?
    Request the current datasheet, construction drawing, order-code definition, declared standards/test methods, and any lot- or order-specific records required by the contract.

  10. What information should an RFQ include?
    Provide the reference model, fibre count and grade, complete route and installation method, required length per reel, total quantity, marking, packaging, destination, required documents, and any contract-specific tests or acceptance criteria.

Related Products

Related Products

Explore additional fiber optic products related to this item and suitable for similar network deployment needs.