GJFJBH
GJFJBH 2F LSZH Duplex Zipcord Fiber Optic Cable
GJFJBH 2F LSZH Duplex Zipcord Fiber Optic Cable for indoor building or equipment-room routes at 2F. Confirm jacket and fiber grade before quoting.

Product summary
The BWNFiber GJFJBH record is a 2F indoor duplex zipcord fiber optic cable with an LSZH outer sheath, Kevlar yarn strength member and a listed 1.9±0.05 × 3.9±0.1 mm cable profile. The record lists single-mode and multimode fiber options, but each quotation must identify one selected fiber grade. This page describes bulk cable configuration; connectors, end-face polish, polarity and finished patch-cord assembly are not specified in the supplied record and must be confirmed separately if required.
GJFJBH 2F configuration at a glance
| Field | Supplied value | Release status |
|---|---|---|
| Model | GJFJBH | Confirmed in P117 record |
| Fiber count | 2F | Publishable |
| Cable form | Duplex zipcord | Publishable from product name/record |
| Fiber options | SM G652; SM G.652.D; MM 50/125; MM 62.5/125; MM OM3-300; MM OM5 | Confirm each source row before release |
| Outer sheath | LSZH | Publishable as material label only |
| Listed overall profile | 1.9±0.05 × 3.9±0.1 mm | Confirm notation and axis convention |
| Strength member | Kevlar yarn | Publishable |
| Connector / termination | Not specified | TBC — source required |
| Weight | 4±10 kg/km in the source reading view | do not use for order release until corrected/confirmed |
Construction and cable profile
The supplied construction table lists two tight-buffered fibers, a 0.9±0.05 mm PVC tight buffer, Kevlar yarn, and an LSZH outer sheath with the same 1.9±0.05 × 3.9±0.1 mm listed profile. The original worksheet contains sparse or merged cells, so the buffer, diameter and material mapping must be checked against the original row/column positions before this table is treated as a final datasheet.
| Component / parameter | Draft value | Evidence gate |
|---|---|---|
| Fiber count | 2F | P117 record |
| Tight buffer material | PVC | Confirm original worksheet |
| Tight buffer diameter | 0.9±0.05 mm | Confirm original worksheet |
| Strength member | Kevlar yarn | P117 record |
| Outer sheath material | LSZH | P117 record |
| Overall profile | 1.9±0.05 × 3.9±0.1 mm | Confirm profile notation |
Fiber options and optical values
The record lists these alternatives:
- SM G652
- SM G.652.D / G652D
- MM 50/125
- MM 62.5/125
- MM OM3-300
- MM OM5
The reading view shows the following attenuation values, but the editorial review flags sparse or merged source cells. Keep this table in engineering review until each value is mapped to the correct fiber row and test condition.
| Fiber option | Wavelength | Attenuation shown in reading view | Release status |
|---|---|---|---|
| SM G652 | 1310 / 1550 nm | ≤0.36 / 0.23 dB/km | Confirm source row |
| SM G652D | 1310 / 1550 nm | ≤0.34 / 0.22 dB/km | Confirm source row |
| MM 50/125 | 850 / 1300 nm | ≤3.0 / 1.0 dB/km | Confirm source row |
| MM 62.5/125 | 850 / 1300 nm | ≤3.0 / 1.0 dB/km | Confirm source row |
| MM OM3-300 | 850 / 1300 nm | ≤3.0 / 1.0 dB/km | Confirm source row |
| MM OM5 | 850 / 1300 nm | ≤3.0 / 1.0 dB/km | Confirm source row |
Do not use these rows to calculate a link budget, transmission reach, or compliance claim until the original worksheet and applicable test conditions are confirmed.
How to select the correct configuration
- Fix the cable form and count: GJFJBH, duplex zipcord, 2F.
- Select one fiber option: single-mode G652/G652D or one of the listed multimode grades.
- Confirm the complete cable profile against the entry port, clamp, pathway and routing space. Do not substitute the tight-buffer diameter for the overall profile.
- Keep LSZH in the order description. If the project requires a flame, smoke, halogen or building classification, request the exact rating/test evidence; LSZH by itself is not a classification claim.
- Confirm whether bulk cable or a finished connectorized assembly is required. Connector type, polish, polarity and mating interface are not present in this record.
- Specify total length, length per drum or roll, quantity, marking text and delivery destination.
Indoor use and project-rating boundary
This record is positioned for indoor fiber distribution. It does not, by itself, establish outdoor, UV, water-blocking, crush, tensile, bend-radius, temperature or fire-rating performance. If a route crosses an outdoor/building boundary or has a project-specific approval requirement, obtain model-specific documentation and define the transition before ordering.
RFQ checklist and documentation
Send the following in the quotation request:
- Product:
GJFJBH 2F LSZH Duplex Zipcord Fiber Optic Cable - One selected fiber grade
- LSZH jacket requirement and any project rating/test requirement
- Confirmed cable profile and any pathway limit
- Total cable length and length per drum/roll
- Quantity
- Cable marking or legend text
- Delivery destination
- Whether bulk cable or connectorized assembly is required
- Current datasheet, construction drawing or test-report requirements
Ask BWNFiber to confirm the original optical table rows, the corrected weight/tolerance, and any required mechanical or environmental limits before technical approval.
Differences from related products
The page should remain the owner for the GJFJBH / 2F / LSZH / OD2.0-class duplex zipcord configuration. The Indoor Fiber Cable category owns family selection, while the OD3.0 and OD2.8 G652D sibling pages own their own dimensions/configurations. A finished fiber patch cord page owns connector, polish, polarity and assembly-intent queries. Do not merge these roles by copying their broad introductions or connector claims into this page.
Applications
Use cases are limited to documented indoor distribution scenarios that match the final approved configuration, such as equipment-room or panel-to-outlet duplex routing. The page should not claim outdoor deployment, a specific data rate, connector compatibility, or a fire classification without model-specific evidence.
Testing and quality-control process
TBC — source required. The supplied record does not provide a complete test method, equipment list, acceptance limit, mechanical test result, or per-reel report. Add a visible testing section only after BWNFiber supplies the applicable optical/mechanical test path and confirms whether per-reel records are available.
Packaging and procurement
Drum/roll length, packaging format, reel dimensions, marking format, MOQ, price, stock and lead time are TBC — source required. The quotation request may ask for these fields, but the page must not promise values.
Request a configuration review
Send the cable schedule, drawing or RFQ with the selected fiber grade and the fields above. BWNFiber should confirm the source worksheet, optical values, weight, project-rating evidence and any termination requirement before the configuration is approved.
Related selection paths
- Use the indoor fiber cable selection page to compare cable families by pathway, structure and project requirement.
- Use the fiber optic cable category when the route may require an outdoor, armored or other non-indoor construction.
- Compare the separately published OD2.8 mm G652D duplex zipcord cable only when that sibling dimension and fixed fiber grade match the requirement.
- Compare the separately published OD3.0 mm duplex zipcord cable when a different cable profile is required.
- Send the confirmed configuration through the fiber cable quotation request after the source-data blockers are closed.
Technical evidence notice
Specifications in this offline draft are sourcing references from the supplied P117 record. They are not a performance guarantee and remain subject to confirmation against the current model datasheet, original worksheet and applicable project requirements. Values marked TBC or source-confirmation required must not be published as final specifications.
FAQ
Is this page for a 2F cable?
Yes. The supplied GJFJBH record covers 2F duplex zipcord cable. Other fiber counts should be quoted as separate configurations.
Which fiber types can be selected?
The record lists SM G652, SM G.652.D/G652D, MM 50/125, MM 62.5/125, MM OM3-300 and MM OM5. Select one grade per order. The optical rows require source-row confirmation before publication.
Does LSZH prove a fire or building rating?
No. LSZH is a jacket-material description. Request the exact project-required flame, smoke, halogen or building-rating evidence for the selected configuration.
Are connectors included?
Connector type, polish, polarity and mating interface are not specified in the supplied record. Confirm whether you need bulk cable or a finished assembly before quoting.
What is the listed cable size?
The record lists 1.9±0.05 × 3.9±0.1 mm. Confirm the original worksheet notation and use the complete profile when checking routing or entry hardware.
What is the cable weight?
The reading view shows 4±10 kg/km, which is held for engineering verification because the value/tolerance may be a source-reading issue. Do not use it for logistics until BWNFiber confirms the original worksheet.
What information is needed for a quotation?
Provide the selected fiber grade, LSZH requirement, profile, total length, length per drum or roll, quantity, marking text, delivery destination and whether a bulk or connectorized product is required.
Related Products
Explore additional fiber optic products related to this item and suitable for similar network deployment needs.