ADSS Cable

ADSS-400m 48F All-Dielectric Self-Supporting Aerial Fiber Optic Cable

ADSS-400m 48F All-Dielectric Self-Supporting Aerial Fiber Optic Cable — all-dielectric self-supporting aerial cable for 48F. Specify span and fiber count against the source drawing.

Adss Cable ADSS Self-Supporting Aerial Fiber Optic Cable

ADSS-400m

Product answer

The BWNFiber ADSS-400m 48F cable is an all-dielectric, self-supporting aerial fiber cable configuration recorded with 48 fibers and four tubes of 12 fibers per tube. The source record lists FRP as the central strength member, loose-tube construction, a water-blocking system and PE/HDPE sheath options. ADSS-400m is retained as the product designation from the source record; it is not, by itself, approval for every 400 m aerial route. Confirm span, wind, ice, sag-tension, attachment hardware, fiber type and the final cable revision before purchase or installation.

What this page covers

  • 48F configuration only.
  • Four tubes, 12 fibers per tube, where confirmed by the source record.
  • The fiber, sheath and packing fields needed for a comparable quotation.
  • Route-specific checks that remain outside a product-family name.

Configuration summary

FieldCurrent source recordRelease status
Product designationADSS-400mSupported by supplied V4; confirm meaning of “400m”
Fiber count48F / 48 fibersSupported
Tube arrangement4 tubes × 12 fibersSupported by V4 table
Fiber typeG.652.D in tube/order rows; SM/MM alternatives also listed elsewhereTBC — source required
Central strength memberFRP, 2.1 mm listedTBC — engineering row check
SheathPE/HDPE listedTBC — select one ordered value
Loose tubePBT, 2.0 mm row listedTBC — dimensional/unit check
Standard drum length2 km listedTBC — commercial/packing confirmation

Construction and optical data

Use a single normalized table in the CMS. do not use for order release the existing multi-column table until the source owner confirms which value belongs to which condition:

ParameterValue to publish after source check
Overall cable diameterTBC — source required (V4 shows 12.5±0.5 mm and 12.50 mm)
Cable weightTBC — source required (V4 shows 130 kg/km and 125.0 kg/km)
Minimum bending radiusTBC — separate installation and operation values
Installation/operation temperatureTBC — separate conditions and units
Wind and ice design inputsTBC — source and design basis required
Optical attenuationPublish only with fiber grade and wavelength mapping confirmed
Rated tension / MAT / EDSPublish only with exact cable revision and test/design basis

How to select the configuration

  1. Identify the ordered fiber grade. Do not combine the G.652.D row with multimode attenuation values.
  2. Provide route span, wind, ice, temperature, attachment points and hardware requirements for engineering review.
  3. Confirm the exact cable diameter, weight, sheath and strength-member rows against the approved revision.
  4. Confirm drum length, total length, marking and destination for a comparable quotation.
  5. Treat a sample, family datasheet or product name as insufficient evidence for route approval unless the exact ordered configuration is identified.

Applications and limits

This configuration is intended for self-supporting aerial fiber routes when the ordered cable and attachment system are approved for the project design basis. Fiber count alone does not establish an allowable span. Do not infer electrical-environment suitability, fire classification, certification, compatibility, lifetime, MOQ, price, lead time or warranty from the product name or sheath material.

RFQ checklist

Include: product designation; 48F; confirmed fiber grade; sheath; total cable length; length per drum; quantity; marking text; destination; route span and load basis; attachment hardware interface; required datasheet/drawing/test documents; and any project-specific standards. Ask BWNFiber to confirm all fields marked TBC — source required before PO release.

CTA

Request a configuration review and quotation. Send the RFQ checklist above. BWNFiber should return a confirmed configuration, document revision and any fields that remain project-specific before order approval.

FAQ

FAQ

Does ADSS-400m guarantee a 400 m span?
No. It is the designation in the supplied source record. A permitted span depends on the complete route load case, sag-tension design, attachment hardware and installation conditions.

Is this page single-mode or multimode?
The supplied V4 lists G.652.D in the tube/order rows but also lists SM and MM alternatives elsewhere. The final ordered fiber grade is TBC — source required and must not be inferred from the title.

What does 48F mean?
It means 48 fibers in the listed configuration. The supplied table maps this to four tubes with 12 fibers per tube; confirm against the approved revision.

Which sheath should I quote?
PE/HDPE is listed as an option in V4. Select one exact sheath in the RFQ and ask BWNFiber to confirm the approved material and thickness.

Can I use the listed MAT, RTS, wind and ice values to approve installation?
Not without the complete design basis and the exact cable revision. Treat them as source values pending engineering review, not as universal installation permission.

What should I send for a quotation?
Send the exact designation, 48F, fiber grade, sheath, length, drum plan, marking, destination, route/load inputs, hardware interface and required documents.

Related Products

Related Products

Explore additional fiber optic products related to this item and suitable for similar network deployment needs.