ADSS
ADSS 12F 250m Span Self-Supporting Aerial Fiber Optic Cable
ADSS 12F 250m Span Self-Supporting Aerial Fiber Optic Cable — all-dielectric self-supporting aerial cable for 12F. Specify span and fiber count against the source drawing.

Product summary
This page is for the exact source-listed configuration: 12F, G.652.D, PE jacket, approximately 12.5±0.3 mm cable diameter, and a 250 m span field. The span field is a product-record input, not approval for every aerial route. Confirm span-by-span loading, sag, clearances, attachment hardware and route-owner requirements before installation.
Key specifications
- Fiber count: 12F
- Fiber type: G.652.D
- Jacket: PE
- Approximate cable diameter: 12.5±0.3 mm
- Maximum allowable tension: 4.2 kN — confirm the controlled source and definition before design use
- Span field: 250 m — source-listed; route-specific engineering review required
- Central strength member material: TBC — source required
Cable construction
| Component / parameter | Source-listed value |
|---|---|
| Loose tubes | 2; outer diameter 2.2±0.1 mm; thickness 0.3±0.05 mm; PBT; tube filling compound |
| Fiber allocation | Maximum 6 G.652.D fibers per tube |
| Fillers | 4; PP |
| Water blocking | Water-blocking yarn and tape |
| Inner sheath | PE, black; nominal 0.8 mm, minimum 0.6 mm |
| Strength member | Aramid yarns |
| Outer sheath | PE, black; nominal 1.7 mm, minimum 1.5 mm |
| Central strength member | Diameter 2.4±0.1 mm; material TBC — source required |
| Approximate cable weight | 121±15% kg/km — confirm the controlled source notation |
Optical characteristics
| Parameter | Source-listed value |
|---|---|
| Attenuation at 1310 nm | ≤0.36 dB/km |
| Attenuation at 1550 nm | ≤0.22 dB/km |
| Cable cut-off wavelength | ≤1260 nm |
| Zero-dispersion wavelength | 1300–1324 nm |
| Zero-dispersion slope | ≤0.092 ps/(nm²·km) |
| Chromatic dispersion at 1288–1339 nm | ≤3.5 ps/(nm·km) |
| Chromatic dispersion at 1550 nm | ≤18 ps/(nm·km) |
| Chromatic dispersion at 1625 nm | ≤22 ps/(nm·km) |
| PMD | ≤0.2 ps/km½ |
| Mode-field diameter at 1310 nm | 9.2±0.4 μm |
| Core/clad concentricity error | ≤0.6 μm |
| Cladding diameter | 125.0±1.0 μm |
| Cladding non-circularity | ≤1.0% |
| Primary coating diameter | 245±10 μm |
These are source-listed cable/fiber values. They are not a complete installed-link loss budget and do not replace project test limits.
Application and compatibility boundary
Use this record to identify a self-supporting aerial cable configuration. Confirm the complete route design before selecting suspension/dead-end hardware. Do not infer wind, ice, temperature, electrical-field, tracking, clearance, certification, or compatibility ratings from the words “ADSS,” “PE,” or “250 m” alone.
For broader family selection, use the BWNFiber ADSS Cable category and its Fiber Optic Cable parent category. The generic Aerial Fiber Optic Cable article is a background explainer, not evidence for this exact SKU.
RFQ information
Include the exact product name, 12F, G.652.D, PE, 12.5±0.3 mm, source-listed 250 m span field, total cable length, required length per drum or roll, quantity, marking text, destination, route/load information and requested datasheet or drawing revision.
Packaging status
The supplied source row identifies the cable type as ADSS 12C, which conflicts with this 12F page. Drum length and dimensions are therefore withheld pending product/packaging confirmation. Do not use the row for quotation until the discrepancy is resolved.
FAQ
Which configuration does this page cover?
The page covers the source-listed 12F, G.652.D, PE configuration with an approximate 12.5±0.3 mm diameter and a 250 m span field. Other fiber counts or constructions require separate confirmation.
Does 250 m approve every aerial route?
No. Treat 250 m as a source-listed product field. A route review must include every span, wind and ice case, temperature, sag, clearance, attachment position and compatible hardware.
What central strength member material is used?
The supplied record contains the value “4” in the material field, which is not an interpretable material designation. TBC — source required.
What optical attenuation is listed?
The source lists ≤0.36 dB/km at 1310 nm and ≤0.22 dB/km at 1550 nm. Keep each value paired with its wavelength; these values do not include connector or splice loss.
What should be included in an RFQ?
Send the exact configuration, total length, drum requirement, quantity, marking, destination, route/load inputs and the requested controlled datasheet or drawing revision. Ask BWNFiber to confirm the two unresolved source fields before comparing quotations.
Related Products
Explore additional fiber optic products related to this item and suitable for similar network deployment needs.