ADSS Cable

48F 13.8mm Self-Supporting Aerial Fiber Optic Cable

48F 13.8mm Self-Supporting Aerial Fiber Optic Cable — all-dielectric self-supporting aerial cable for 48F. Specify span and fiber count against the source drawing.

Adss Cable ADSS Self-Supporting Aerial Fiber Optic Cable

Product summary

The supplied BWNFiber record covers a 48F G.652.D self-supporting aerial fiber optic cable with an approximate 13.8 mm overall cable diameter. It lists a four-loose-tube, double-sheath construction with an FRP central strength member, glass-yarn reinforcement, MDPE inner sheath and HDPE external sheath. These details identify the configuration for quotation; the controlled product source must be approved before the page is published.

The 13.8 mm dimension is the listed overall cable size. It is not, by itself, approval for a particular aerial span, wind/ice load, attachment position, utility voltage, sag-tension case or hardware set. Confirm the route calculation and compatible fittings with the responsible engineer or infrastructure owner.

Key configuration

FieldSupplied record
Fiber count48F
Fiber typeG.652.D — source confirmation required before publication
ApplicationSelf-supporting aerial access links
Overall cable diameterApproximately 13.8 mm
Cable weightApproximately 160 kg/km
Model / part numberTBC — source required
Connectors or interfacesNot specified; this is a cable-only record

Construction and dimensional data

The following values are transcribed from the supplied P073 record. The source review flags the complex table for engineering alignment; do not use this section as a released drawing until that review is complete.

Component / parameterSupplied specification
Loose tubes4
Loose-tube outer diameter2.4 mm
Loose-tube thickness0.35 mm
Loose-tube materialPBT
Loose-tube water blockingTube filling compound
Maximum fibers per tube12, G.652.D
Central strength memberFRP, 2.5 mm diameter
Water-blocking materialWater-blocking jelly
Strength member 1Glass yarns
Inner sheathMDPE, black, 0.8 mm thickness
Strength member 2Glass yarns
External sheathHDPE, black, 1.60 mm thickness
Fiber materialDoped silica
Overall diameterApproximately 13.8 mm

Optical characteristics

The supplied record lists the following values. Its multi-column optical table requires engineering review of wavelength pairing, units, inequalities and test basis. They are therefore source-review values, not a finished-cable acceptance result.

Parameter / conditionSupplied value
Attenuation coefficient0.35 dB/km @ 1310 nm; 0.35 dB/km @ 1383 nm; 0.25 dB/km @ 1460 nm; 0.21 dB/km @ 1550 nm; 0.23 dB/km @ 1625 nm
Cable cut-off wavelength1260 nm
Zero-dispersion wavelength1300–1322 nm
Zero-dispersion slope0.092 ps/(nm²·km)
Chromatic dispersion3 ps/(nm·km) @ 1285–1330 nm; 5.3 ps/(nm·km) @ 1271–1360 nm; 18.6 ps/(nm·km) @ 1550 nm; 23.7 ps/(nm·km) @ 1625 nm
PMD0.1 ps/km½
PMD value for link design0.06 ps/km½
Mode-field diameter9.2 ± 0.4 μm @ 1310 nm; 8.4–10.4 μm @ 1550 nm
Core/clad concentricity error0.6 μm
Cladding diameter125.0 ± 0.7 μm
Cladding non-circularity1%
Primary coating diameter245 ± 5 μm
Coating non-circularity0.7%
Coating concentricity10 μm
Fiber curl≥4 m
Refractive index1.467 @ 1310 nm; 1.468 @ 1550 nm

Before publication, BWNFiber should confirm whether each value is a fiber specification or a finished-cable requirement, the governing test method, sample identity and acceptance limit.

Environmental conditions

ConditionSupplied range
Operating temperature−20°C to +70°C
Storage / transport temperature−20°C to +70°C
Installation temperature−15°C to +60°C

Use the installation range for cable handling only after the controlled source is approved. These temperatures do not establish a route-specific utility or environmental qualification.

How to select and verify this configuration

  1. Confirm that the required configuration is 48F, G.652.D and approximately 13.8 mm.
  2. Confirm the complete construction row: four tubes, 12 fibers per tube, FRP central member, glass-yarn reinforcement and the two sheath layers.
  3. Provide the surveyed maximum and ruling spans, wind, ice, temperature, attachment position, clearances and route-owner requirements.
  4. Match the cable diameter and weight to the approved suspension/dead-end hardware and installation method.
  5. Request the controlled datasheet, cross-section/drawing, test schedule and any route-specific calculation before purchase-order release.

This page does not establish connector compatibility, utility-voltage suitability, span approval, standards compliance, certification or hardware compatibility. Those fields are TBC — source required.

Packing and quotation information

The supplied packing table lists these alternatives. Confirm the selected length and drum dimensions for the exact ordered configuration; do not treat either row as a universal promise.

Cable type in sourceDrum lengthD (mm)d (mm)B (mm)b (mm)
ADSS 48C4,000 m1,3005501,100980
ADSS 48C5,000 m1,4505501,100980

For an RFQ, state the selected configuration, total cable length, requested length per drum or roll, quantity, marking text and delivery destination. Also request confirmation of the controlling document revision, test/document package, hardware scope and any deviations.

RFQ CTA

Request a 48F 13.8 mm ADSS configuration review. Send the route/span schedule, selected drum length, quantity, marking text, delivery destination and required technical documents. Ask BWNFiber to confirm the part number, controlled datasheet, drawing, optical test basis, packing row and hardware boundary before ordering.

Image and link notes for CMS handoff

  • Use only the supplied first-party product image after MIME, decode, dimensions, rights and product-match QA. Do not generate a replacement or a test/structure image.
  • Suggested alt text: 48F G.652.D 13.8 mm self-supporting aerial fiber optic cable.
  • Link ADSS cable selection by span, MAT, RTS and route to the approved BWNFiber ADSS category page; it owns the broad selection task.
  • Link the RFQ CTA to the approved contact/quote destination after URL confirmation.
FAQ

FAQ

What configuration does this page cover? The supplied record covers 48F, G.652.D and an approximately 13.8 mm overall cable diameter. A different fiber count, diameter or construction should be quoted as a separate configuration.

Is 13.8 mm a guaranteed aerial span? No. It is the listed overall cable size. Span suitability requires route geometry, load cases, sag-tension, clearances and compatible hardware.

What construction is listed? Four PBT loose tubes, an FRP central member, glass-yarn reinforcement, an MDPE inner sheath and an HDPE external sheath are listed. The source table requires engineering reconciliation before release.

What optical values apply? The source-review optical values are paired in the table above. Confirm the test basis and acceptance limits before treating them as purchase requirements.

What temperatures are listed? Operating and storage/transport are listed as −20°C to +70°C; installation is listed as −15°C to +60°C.

Which drum lengths are listed? The source packing table lists 4,000 m and 5,000 m alternatives with different D dimensions. Confirm the row for the ordered configuration.

Does the cable include connectors? No connector or termination option is specified in the supplied record. Confirm any termination requirement separately.

What should the quotation include? Include 48F, G.652.D, approximately 13.8 mm, total length, drum/roll length, quantity, marking text, destination, route/load inputs, hardware scope and requested documents.

Related Products

Related Products

Explore additional fiber optic products related to this item and suitable for similar network deployment needs.