40G QSFP+ Immersible Active Optical Cable for Immersion Environments
A four-lane QSFP+ immersible AOC for 40G Ethernet and InfiniBand, with low power per cable end and length options up to 100 m. Unlike a standard air-cooled AOC, this assembly is intended for use in dielectric-coolant environments. The project coolant, host coding, route and ordered length must be confirmed before release.
40G QSFP+ Immersible AOC Specifications
| Base part number | BWNR-AOC-QSFP-40G-SR4-YL |
|---|---|
| Endpoint form factor | QSFP+ |
| Data rate | 41.25 Gbps nominal aggregate; up to 11.3 Gb/s per lane stated in the overview |
| Lane / channel detail | Four full-duplex optical lanes |
| Length guidance | Standard length options from 1 to 100 m; fiber type is length-dependent |
| Fiber / wavelength | OM2 or OM3 for shorter options; OM3 for longer options per ordering table |
| Power | Maximum 1.5 W per cable end |
| Standards / management | QSFP MSA, SFF-8636 and IEEE P802.3ba |
| Operating temperature | 0°C to +70°C operating; -40°C to +85°C storage |
| Environment | Liquid immersion / liquid-cooled data center deployment; coolant compatibility is project-specific |
Source: supplied BWNR-AOC-QSFP-40G-SR4-YL datasheet. Final host coding, coolant compatibility, reach and ordered configuration remain subject to engineering confirmation.
Technical notice: Published values summarize the supplied datasheet revision. Confirm the host platform, lane mode, fiber grade, ordered length, coolant chemistry and released BOM before approval. Lengths beyond the fully mapped ordering table require quotation-stage confirmation. The approved quotation and released product documentation govern the supplied configuration.
Designed for Liquid-Cooled Data Center Links
- Liquid immersion design for dielectric-coolant environments
- Hot-pluggable QSFP+ form factor
- Four full-duplex optical lanes
- Programmable EEPROM and serial identification
- Maximum 1.5 W power consumption per cable end
- 100% factory tested; custom length, labeling and packaging available
Compatibility and Coolant Confirmation Checklist
- Send the exact switch, NIC or accelerator model and firmware for host-coding review.
- Confirm the port mode, aggregate rate, lane mode and connector at each endpoint.
- Identify the dielectric coolant manufacturer and fluid grade; do not assume every fluid is compatible.
- Measure the routed path and service loop inside and outside the cooling system.
- Confirm operating temperature, bend path, labeling, packaging and required acceptance tests.
- Approve the final part number and BOM before production.
Ordering Information
| Part Number | Length | Fiber | Configuration Note |
|---|---|---|---|
| BWNR-AOC-QSFP-40G-SR4-YL-1M | 1 m | OM2 / OM3 | Standard |
| BWNR-AOC-QSFP-40G-SR4-YL-3M | 3 m | OM2 / OM3 | Standard |
| BWNR-AOC-QSFP-40G-SR4-YL-5M | 5 m | OM2 / OM3 | Standard |
| BWNR-AOC-QSFP-40G-SR4-YL-10M | 10 m | OM2 / OM3 | Standard |
| BWNR-AOC-QSFP-40G-SR4-YL-20M | 20 m | OM3 | Standard |
| BWNR-AOC-QSFP-40G-SR4-YL-30M | 30 m | OM3 | Standard |
Custom lengths, labeling and packaging are available subject to project review. Use the supplied datasheet and approved quotation as the final ordering authority.
Typical Liquid Cooling Applications
- 40G Ethernet links in liquid-cooled data centers
- InfiniBand QDR, DDR and SDR interconnects
- Immersion switch-to-switch and server connections
- High-density short-reach optical links
Immersible AOC vs Standard AOC vs Passive DAC
| Selection Point | Immersible AOC | Standard AOC | Passive DAC |
|---|---|---|---|
| Dielectric liquid immersion | Designed for immersion use | Not recommended | Confirm product-specific suitability |
| Typical reach | Medium optical reach; rate-dependent | Medium optical reach in air-cooled systems | Very short copper reach |
| Cable bulk | Low | Low | Higher |
| EMI immunity | Excellent | Excellent | Limited versus optics |
| Best fit | Liquid-cooled racks needing optical reach | Air-cooled data center optical links | Ultra-short, lowest-power in-rack links |
Related High-Speed Connectivity
Confirm the Immersion Configuration
Send the host models, coolant grade, cable length, quantity and qualification requirements. BWNFiber can return a proposed part number and BOM for review.
