Product summary
The proposed BWNFiber configuration is an indoor, unconnectorized simplex fiber cable with a nominal 3.0 mm cable size, LSZH outer sheath and single-mode fiber identified in the supplied record as G.652.D/G.657.A1. The final product model, diameter tolerance, termination status and approved option mapping require confirmation before ordering.
Canonical-owner warning: the existing BWNFiber product page at https://www.bwnfiber.com/product/3mm-round-indoor-single-mode-simplex-drop-cable/ currently describes a materially different G.657.B3, TPU/UV, aramid-yarn configuration with outdoor/aerial values. Do not use this draft to overwrite that page or to create a second URL until the product owner reconciles the two BOM identities.
Short buyer answer
Use this page when your bill of materials calls for one simplex indoor cable in a nominal 3.0 mm LSZH construction. It is not a connectorized patch cord unless the approved quotation explicitly adds connectors and assembly work. For an accurate quote, identify the confirmed model, fiber grade, total length, roll/drum requirement, marking and delivery destination.
Key features — source gated
- 1F simplex configuration — TBC: confirm explicit capacity field.
- Single-mode G.652.D/G.657.A1 — TBC: confirm whether these are alternatives or one approved combination.
- LSZH outer sheath — source-listed; certification/flame rating TBC.
- Nominal 3.0 mm cable size — source-listed; tolerance TBC.
- 0.9 mm tight buffer, white, PVC — source-listed; confirm against drawing.
- Glass-yarn strength member — source-listed; confirm against BOM.
Technical specifications
| Parameter | Supplied record | Release status |
|---|---|---|
| Product model | Not assigned | TBC — required |
| Cable type | Simplex indoor fiber cable | Confirm unconnectorized form |
| Fiber count | 1F | TBC — explicit source row required |
| Fiber type | SM G.652.D / G.657.A1 | TBC — option mapping required |
| Tight buffer | 0.9 mm PVC, white | TBC — drawing/BOM required |
| Strength member | Glass yarn | TBC — BOM required |
| Outer sheath | LSZH, yellow | TBC — material/color record required |
| Cable diameter | 3.0 mm nominal | Publish only with corrected tolerance |
| Jacket thickness | 0.45–0.5 mm / 0.35–0.5 | do not use for order release; malformed/ambiguous source |
| Attenuation | ≤0.4 / 0.3 at 1310/1550 nm | TBC — units, fiber grade and test method required |
| Tensile | Long-term 50 N | TBC — method and scope required |
| Crush | Long-term 100 N/100 cm | TBC — standard and test setup required |
| Bend radius | Dynamic 20×D | TBC — installation vs operation definition required |
| Operating temperature | −20 °C to +60 °C | TBC — confirm operating scope and source |
Interfaces and configuration
This draft describes cable rather than a finished patch cord. Connector type, polish, end-face, polarity, length per end and termination status are TBC — source required. Do not add LC, SC, FC, ST, APC, UPC, pull-eye or compatibility claims unless they appear in the approved BOM or quotation.
The supplied record names G.652.D/G.657.A1. Confirm whether the buyer selects one fiber grade per order, whether both are available under the same model, and whether any multimode option exists. Do not combine alternatives in one RFQ line.
Compatibility and application conditions
The supported use statement is limited to indoor fiber distribution as recorded in the source. Plenum, riser, CPR, OFNR/OFNP, RoHS, Telcordia, IEC or building-code compatibility is TBC — source required. Connectorized patch-cord, OptiTAP, outdoor, armored and hardened-connector uses belong to other product roles unless a new approved configuration is supplied.
How to select the configuration
- Confirm the BWNFiber model and whether the cable is supplied unconnectorized.
- Select one approved single-mode fiber grade: G.652.D or G.657.A1, subject to the option matrix.
- Confirm 1F simplex capacity and nominal 3.0 mm diameter with the corrected drawing.
- Confirm LSZH material, color and any required flame/smoke or regional standard.
- State total length, lengths per drum/roll, quantity, marking text and destination.
- Request the approved datasheet, drawing and applicable test/inspection record with the quotation.
Differences from related products
- Duplex zipcord: this page is for one simplex cable; do not assume two fibers or paired polarity.
- Patch cord: this draft does not include connectors or a tested end-to-end assembly.
- Broad 1F simplex page: this page is only for the confirmed nominal 3.0 mm LSZH configuration and its approved fiber-grade options.
- 3.0 mm TPU/OptiTAP assembly: jacket material, termination and outdoor/hardened-connector evidence are different and must not be merged.
Use, testing and procurement
Publish only the supported use: indoor fiber distribution. “Patch-panel interconnect”, “pigtail”, “equipment interconnect”, “FTTH drop” or “outdoor” require configuration-specific evidence.
The page may state only that applicable inspection/test records can be supplied if BWNFiber confirms this workflow. Do not claim 100% testing, IL/RL testing, OTDR, standards compliance, batch traceability or acceptance criteria without a named procedure, limit and record owner.
Confirm drum/roll type, standard or custom length, net/gross weight, marking/label format, quantity per package and destination before publication. Do not infer stock, MOQ, lead time or warranty.
RFQ fields
Product name + confirmed model; 1F simplex; selected fiber grade; LSZH; nominal 3.0 mm; total length; length per drum/roll; quantity; cable marking; required documents; delivery destination; connector/termination requirement (or “unconnectorized”).
Downloads
TBC — 3.0 mm cable drawing with corrected toleranceTBC — approved product datasheetTBC — applicable inspection/test record or acceptance specification
CTA
Request a configuration review and quotation. Ask BWNFiber to confirm the model, source drawing, fiber-grade option, cable tolerance, termination status and available documentation before pricing.
Related BWNFiber resources
- Start with the fiber optic cable selection category when the installation route or cable family is not yet fixed.
- Compare building-route families in the indoor fiber cable category; that category owns broad indoor-cable selection intent.
- If the requirement includes connectors on both ends, continue to fiber optic patch cords rather than treating this bulk-cable record as a finished assembly.
- For pre-terminated or custom connectorized builds, review the fiber cable assemblies category.
Image and schema handoff
- Hold the existing local WebP until product identity, provenance, dimensions, MIME and rights are verified. Do not generate or reconstruct a product image.
- Suggested filename after approval:
3-0mm-lszh-simplex-fiber-optic-cable-1f-sm.webp. - Suggested alt text:
3.0 mm LSZH simplex fiber optic cable, 1F single-mode configuration. - Add Product, FAQPage and BreadcrumbList only for visible, confirmed fields; omit price, offers, stock, ratings, reviews, certifications and unverified images.
Specification notice
Figures and descriptions in this offline draft are for configuration review only, not a performance guarantee. Final approval must use the selected part number, current datasheet, agreed drawing, applicable test requirements and purchase specification. TBC fields are not approved product claims.
