Product summary
This page covers a fixed 12F single-mode indoor fiber cable configuration intended for MPO cable assembly production. The local P184 record lists G.652.D, G.657.A1 and G.657.A2 as fiber-grade options, a recorded 3.0±0.1 mm cable size, yellow as the recorded color, LSZH/OFNR wording, and an aramid-yarn strength member.
This is cable stock, not a finished MPO patch cord. Connector type, gender, ferrule layout, polarity, pinning, endface and finished assembly length are not defined by the 12F fiber count and remain TBC — source required.
Verified configuration recorded for P184
| Field | Recorded value | Ordering rule |
|---|---|---|
| Fiber count | 12F | Fixed for this page; other counts require their own approved configuration |
| Fiber grade | G.652.D, G.657.A1 or G.657.A2 | Select one approved grade; do not combine alternatives in one RFQ |
| Color | Yellow (recorded) | Confirm whether this is the required jacket color for the selected build |
| Jacket / classification | LSZH or OFNR wording is recorded | Confirm whether these are separate order selections and provide the applicable classification evidence |
| Cable size / OD | 3.0±0.1 mm (recorded) | Match the complete cable profile to the entry, clamp and routing space |
| Strength member | Aramid yarn (recorded) | Confirm against the approved construction drawing |
| Packing | 1 km / roll (recorded) | Confirm whether the rule applies to the selected grade/jacket and state total quantity |
Fiber-grade and jacket selection
The listed fiber grades are alternatives. Choose the grade required by the network design and record it explicitly in the quotation request. Do not infer transmission reach, connector performance or a complete link budget from the fiber grade alone.
The source wording combines a color (Yellow) with jacket/classification terms (LSZH and OFNR). These fields must be confirmed before publication. LSZH describes a low-smoke, zero-halogen jacket characteristic; OFNR is a fire-use classification term. The presence of one label in the source record does not, by itself, prove certification or interchangeability.
Optical characteristics
The P184 draft records the following attenuation values. They must be rechecked against the approved datasheet and test method before publication.
| Fiber grade | Wavelength | Recorded attenuation |
|---|---|---|
| G.652.D | 1310 nm | ≤0.40 dB/km |
| G.652.D | 1550 nm | ≤0.30 dB/km |
| G.657.A1 / G.657.A2 record | 1310 nm | ≤0.38 dB/km |
| G.657.A1 / G.657.A2 record | 1550 nm | ≤0.28 dB/km |
These are cable-fiber values recorded in the local source. They are not a complete link-loss allowance and do not include connector, splice, adapter or system margins.
Interface and assembly boundary
The 12F cable count does not specify a finished MPO interface. The following fields are therefore intentionally not asserted:
| Assembly field | Status |
|---|---|
| MPO connector type | TBC — source required |
| Connector gender | TBC — source required |
| Polarity / pinning | TBC — source required |
| Ferrule layout / endface | TBC — source required |
| Finished assembly length | TBC — source required |
If a finished assembly is required, send these fields separately rather than treating the cable-stock page as a complete patch-cord specification.
How to prepare an RFQ
Send the following information:
- Product:
12F Single-Mode MPO Indoor Fiber Optic Cable Stock. - One fiber grade: G.652.D, G.657.A1 or G.657.A2, subject to approval.
- Jacket selection and required color/classification, with the project’s applicable fire requirement.
- Total cable length and required length per roll/drum.
- Quantity, cable marking text and delivery destination.
- If assembly is required: connector type, gender, polarity, pinning, endface and finished length.
- Any drawing, test-report or acceptance-document requirement.
Documents and testing
TBC — source required: approved construction drawing, P184 datasheet, fire-classification evidence, attenuation test method/report, and any manufacturing or inspection record intended for buyer review.
Do not add OTDR, insertion-loss, return-loss, tensile, crush, bend-radius, temperature, certification or standards claims until the P184-specific source document supports them.
Packaging and procurement
The local draft records 1 km / roll. Confirm whether this is the standard packing rule for every selected fiber/jacket configuration. The quotation should keep fiber grade, jacket/classification, length, roll quantity, marking and destination together so that alternatives are not accidentally mixed.
CTA
Request the approved 12F cable configuration. Send the fiber grade, jacket/classification requirement, total length, roll quantity, marking text and destination. If you need a finished MPO assembly, include connector, gender, polarity, pinning, endface and finished length requirements.
