BWNF-GE-CXXL-120D
1.25G CWDM SFP 120 km Transceiver, Duplex LC — BWNF-GE-CXXL-120D
BWNF-GE-CXXL-120D is the proposed order code for a 1.25G CWDM SFP configuration with a stated 120 km reach class, duplex LC interface, single-mode fiber path, and digital diagnostics. The exact channel range, receiver type, optical limits, reach conditions, temperature grades, diagnostics, standards, and compatibility require confirmation against the approved BWNFiber datasheet, product master, drawing, and qualification records before quotation or publication.

Product Value Summary
BWNF-GE-CXXL-120D is the proposed order code for a 1.25G CWDM SFP configuration with a stated 120 km reach class, duplex LC interface, single-mode fiber path, and digital diagnostics. The exact channel range, receiver type, optical limits, reach conditions, temperature grades, diagnostics, standards, and compatibility require confirmation against the approved BWNFiber datasheet, product master, drawing, and qualification records before quotation or publication.
Short Answer for Buyers
Do not approve this module from the 120 km label alone. Confirm the exact CWDM channel at both ends, the mux/demux port plan and insertion loss, host port and firmware, approved transmitter and receiver limits, route loss at the ordered wavelength, connector/splice loss, dispersion and other penalties, temperature grade, engineering margin, and required documents.
Light CTA: Send the channel plan, host models, route-loss estimate, temperature grade and quantity for an exact-configuration review. [Link: https://www.bwnfiber.com/contact/ — verify production CTA mapping before use.]
Proposed Key Features — Source Approval Required
- Form factor: SFP — TBC — approved datasheet required
- Nominal data rate: 1.25 Gb/s — TBC — rate/protocol table required
- Technology: CWDM — TBC — exact grid/channel matrix required
- Nominal reach class: 120 km — TBC — qualification and optical-budget conditions required
- Optical interface: duplex LC — TBC — drawing required
- Fiber: single-mode — TBC — approved fiber/route conditions required
- Digital diagnostics: TBC — implemented fields and calibration evidence required
- Commercial / industrial temperature options: TBC — exact order-code mapping and qualification required
Technical Specification Verification Matrix
| Attribute | Value in supplied draft | Publication status | Required proof |
|---|---|---|---|
| Part number | BWNF-GE-CXXL-120D | TBC | Product master / approved datasheet |
| Form factor | SFP | TBC | Datasheet / drawing |
| Data rate | 1.25 Gb/s | TBC | Supported-rate/protocol table |
| Wavelengths | Title/table: 1470–1610 nm; FAQ: C27–C61 | Blocked contradiction | Controlled channel matrix |
| Transmitter | CWDM DFB | TBC | BOM / optical specification |
| Receiver | PIN-TIA | TBC; high-risk | BOM / optical specification |
| Connector | Duplex LC | TBC | Mechanical drawing |
| Fiber | SMF; order guide says OS2 | TBC | Approved media and reach conditions |
| Nominal reach | 120 km | TBC | Qualification and optical budget |
| Tx center wavelength | Ordered λ ±6.5 nm | TBC | Datasheet/test method |
| Tx average power | +1 to +7 dBm | TBC | Datasheet/production limits |
| Spectral width | Maximum 1 nm | TBC | Datasheet/test method |
| Extinction ratio | Minimum 8.2 dB | TBC | Datasheet/test method |
| Rx wavelength | Ordered λ ±6.5 nm | TBC | Datasheet/test method |
| Rx sensitivity | Maximum −30 dBm | TBC | BER condition/test method |
| Rx overload | Maximum −10 dBm | TBC | Datasheet/test method |
| LOS assert/de-assert | Draft: −45/−31 dBm | TBC | Test method/limits |
| Supply | 3.13–3.47 V | TBC | Electrical specification |
| Supply current | Maximum 300 mA | TBC | Electrical specification |
| Power | Maximum 1.0 W | TBC | Electrical specification |
| Operating temperature | 0–70 °C; −40–85 °C optional | TBC | Exact order codes/qualification |
| Storage temperature | −40–85 °C | TBC | Qualification/datasheet |
| Humidity | 5–85%, non-condensing | TBC | Qualification/datasheet |
| DOM/DDM | Yes | TBC | EEPROM/readout/calibration record |
| Compliance | SFP MSA, SFF-8472, IEEE 802.3z, RoHS | TBC | Current declarations/qualification |
Interface, Fiber, and CWDM Channel Conditions
The supplied draft describes a duplex-LC, dual-fiber single-mode module. Confirm that interface in the approved drawing. A duplex optical link normally uses one fiber for transmit and one for receive, with a compatible module and channel plan at the far end.
ITU-T G.694.2 defines the CWDM wavelength grid at 20 nm spacing across nominal wavelengths from 1270 to 1610 nm. That industry grid does not prove which channels BWNF-GE-CXXL-120D supports. The exact saleable channel list must come from the BWNFiber product master and datasheet.
Compatibility and Application Conditions
Do not publish a generic brand list. For each inquiry, record:
- Host manufacturer and exact switch/router/NIC model.
- Port type, supported data rate/protocol, and operating mode.
- Software or firmware version and any third-party-optics policy.
- Required EEPROM code.
- Validation status:
coding available,sample tested,exact host verified, ornot yet verified.
Potential applications such as Gigabit Ethernet CWDM access, metro transport, campus links, SAN, or cluster interconnects remain TBC — source required until the approved protocol/application matrix confirms them.
How to Select the Correct Configuration
- Confirm the protocol and rate. Do not infer protocol support from
1.25Galone. - Select the exact CWDM channel. Match the ordered wavelength to the mux/demux port plan and far-end design.
- Confirm both endpoint modules. Record the exact part number, channel, reach class, temperature grade, and host code at each end.
- Build the maximum channel-loss budget. Use approved minimum Tx power minus required receiver input, then subtract mux/demux, fiber, connector, splice, dispersion/other penalties, and engineering margin.
- Check receiver overload. Use maximum Tx power, minimum path loss, and the approved overload limit; add attenuation only when engineering confirms it is required.
- Validate the host. Test the coded sample in the exact host and firmware before volume ordering.
- Approve the document revision. Bind the quotation/PO to the exact datasheet, drawing, declarations, and test limits.
Differences from Related Products
| Decision point | 20/40/80 km siblings | BWNF-GE-CXXL-120D candidate |
|---|---|---|
| Intended reach class | Shorter nominal classes | 120 km nominal class — TBC |
| Optical limits | Must come from each exact datasheet | TBC — do not copy sibling limits |
| Receiver type | May vary by reach/revision | TBC — exact BOM/datasheet required |
| Channel availability | May vary by reach/revision | TBC — controlled matrix required |
| Route approval | Link budget required | Link budget, overload, penalties and margin required |
| Page architecture | Variant or exact SKU | Publish separately only if evidence creates independent value |
If BWNFiber cannot document buyer-relevant differences beyond the distance number, consolidate the 1.25G CWDM reach variants into one controlled family page with selectable, evidence-backed variants.
Testing and Quality-Control Evidence Required
Before publishing a test claim, BWNFiber QA must define and approve:
- Exact test item and acceptance limit.
- Instrument, calibration status, setup, wavelength, temperature, and sample plan.
- DOM comparison method and tolerance.
- Optical power, sensitivity/BER, overload, wavelength, extinction ratio, LOS, electrical, thermal, and interoperability scope as applicable.
- Unit/batch traceability and report availability.
This draft does not claim that any named test has been completed.
Packaging and Procurement Information
The following fields are TBC — source required: packaging unit, antistatic protection, dust-cap configuration, labels, serial/batch traceability, included documents, MOQ, stock, lead time, sample policy, warranty, return terms, and export packaging.
Required Information for an RFQ
Send:
- Exact product/model requested.
- Quantity and target delivery location/date.
- CWDM channel at each endpoint and mux/demux port plan.
- Host manufacturer, model, port type, and firmware/software version at both ends.
- Required rate/protocol and port mode.
- Installed route length, fiber type, measured attenuation by wavelength if available, mux/demux loss, connector count, splice count, and engineering margin.
- Commercial or industrial temperature requirement.
- Required EEPROM code and sample-validation plan.
- Required datasheet, drawing, declarations, test report, traceability, labeling, and packaging.
Datasheet, Drawing, and Test-Report Download Area
- Exact-SKU datasheet: TBC — source required
- Mechanical/interface drawing: TBC — source required
- Controlled channel/order-code matrix: TBC — source required
- DOM/EEPROM information: TBC — source required
- Compliance declarations: TBC — source required
- Test/qualification report: TBC — source required
Do not show an empty or generic download as if it were model-specific.
Frequently Asked Questions
Does the 120 km label guarantee operation on a 120 km installed route?
No. It is a nominal reach class until the exact datasheet and route calculation are approved. Validate minimum Tx power, receiver sensitivity, overload, mux/demux loss, fiber loss at the ordered wavelength, connector/splice loss, dispersion/other penalties, and engineering margin.
Which CWDM wavelengths can I order?
TBC — source required. The supplied draft conflicts between 1470–1610 nm and C27–C61. Use only the BWNFiber controlled channel/order-code matrix.
Is the receiver PIN or APD?
TBC — source required. Do not infer the receiver architecture from competitor products or reach alone. Confirm it from the approved BWNFiber BOM/datasheet.
Can I order a DWDM channel under this SKU?
Not from this page. BWNF-GE-CXXL-120D is positioned as a CWDM SKU. A DWDM configuration needs its own approved product family, ITU channel grid, part number, datasheet, and page owner.
Do both ends need the same CWDM channel?
The endpoint and mux plan must be reviewed together. For a conventional duplex CWDM channel, both ends normally use the same nominal transmit channel, but the approved topology, mux ports, and exact module pair control the final selection.
Can I mix 80 km and 120 km modules?
Do not approve a mixed-reach pair from wavelength and connector labels alone. Compare the exact rate/protocol, Tx power, sensitivity, overload, channel plan, temperature, and qualification conditions for both part numbers.
Is it compatible with Cisco, Arista, Juniper, or another host?
Compatibility is exact-host and firmware specific. Provide both host models and software versions. Report whether coding is available, a sample has been tested, or the exact configuration remains unverified.
Does DOM prove the module will pass the link?
No. DOM can expose operating measurements when implemented and calibrated, but it does not replace an approved optical budget, overload check, route acceptance, or interoperability test.
Which fiber and patch cord should I use?
TBC — source required. Confirm the approved single-mode fiber, LC polish/interface, patch-cord specification, and mux/demux connectors from the datasheet and route design. Do not infer LC/UPC only from competitor pages.
Is the industrial-temperature option available?
TBC — source required. Require the exact industrial order code and qualification record; do not add an industrial option only because it appears in a generic family draft.
What documents should be attached to the purchase order?
Bind the order to the approved datasheet revision, channel/order code, drawing, host code, temperature grade, required declarations, acceptance limits, labels, packaging, and any agreed unit/batch test record.
What should be validated before a volume order?
Validate a controlled sample pair in the exact hosts and firmware, confirm the channel/mux plan, measure the route or simulate the approved budget, review DOM readings, and record acceptance results against the approved specification.
RFQ / CTA
Request an exact-configuration review for BWNF-GE-CXXL-120D. Send the channel plan, mux/demux ports, endpoint hosts, protocol, route-loss inputs, temperature grade, quantity, required documents, and sample-validation needs. BWNFiber should return the approved order code, current document revisions, validation status, commercial response, and unresolved engineering holds.
Primary destination candidate: BWNFiber contact page. Confirm the final CMS CTA mapping and remove unsupported response-time promises before publication.
Related Products
Explore additional fiber optic products related to this item and suitable for similar network deployment needs.